.gitignore

@@ -0,0 +1,19 @@
+# KiCad lock files (created while project is open)
+~*.lck
+
+# KiCad regenerated footprint info cache
+fp-info-cache
+
+# KiCad autosaved backups
+firstpcb-backups/
+
+# Local pre-edit backups
+*.pre-drc-fix
+
+# Python bytecode cache
+__pycache__/
+*.pyc
+
+# Editor/tooling local state
+.history/
+.omc/

BOM.md

@@ -0,0 +1,114 @@
+# Bill of Materials — firstpcb (Stepper Driver + 12V Boost)
+
+> **Branch:** `feat/boost-converter-integration`
+> **Generated:** 2026-05-23
+> **Estimated cost:** ~$50–80 first build (with combo kits) • ~$10/board in actually-used parts
+
+---
+
+## Critical Notes Before Ordering
+
+| # | Issue | Impact |
+|---|-------|--------|
+| 1 | **BOM package field said "QFN-20 3.5×3.5mm"** for U1 | The actual TPS61088 RHL package is **VQFN-20, 4.5×3.5mm**. Your KiCad footprint is correct — only the BOM description was wrong (now fixed). |
+| 2 | **PCB silkscreen reads `TPS61088QRHLRQ1`** (automotive Q1 variant), BOM lists `TPS61088RHLR` (commercial) | The commercial **TPS61088RHLR** is a fully drop-in substitute: same RHL package, same pinout. Use it — it's ~5× cheaper and far more available. |
+| 3 | **U1 vs U2 designator mismatch** | Standalone `tps61088_boost.kicad_sch` test schematic uses U1; integrated `firstpcb.kicad_pcb` uses U2. Same part either way. |
+| 4 | **TPS61088 pinout verified** | Schematic pins 1/3/4/5/6/7/8/9/11/12/15 = VIN/EN/SS-TR/COMP/FB/AGND/PGOOD/VOUT/BST/SW/PGND — matches TI datasheet exactly. ✅ |
+| 5 | **L1 inductor substitution warning** | If swapping the Bourns SRP1265 for the cheaper TDK SPM10065, the footprint changes (12.6×12.6mm → 10.5×10mm). **Verify the KiCad footprint matches before ordering.** |
+
+---
+
+## Recommended Combo Kits (Buy These First)
+
+These cover multiple BOM lines and stock you up for future builds:
+
+| Kit | Covers | Est. Price | Source |
+|-----|--------|-----------:|--------|
+| **0805 E96 1% Resistor Sample Book** (170 values × 25pcs) | R1, R2, R3, R4, R5 + lifetime supply | ~$15–25 | [Amazon B09Z2RDW2F](https://www.amazon.com/Resistor-ohm-10M-Assorted-Resistance-Resistor-0805/dp/B09Z2RDW2F) |
+| **0805 SMD Ceramic Cap Kit** (50V, 22pF–22µF) | C6, C8, C9 | ~$5–15 | [AliExpress multi-value kit](https://www.aliexpress.com/item/4000023618004.html) |
+| **1206 22µF 25V X5R 50-pack** (CL31A226KAHNNNE) | C4, C5, C10, C11 | ~$8 | [AliExpress 50-pack](https://www.aliexpress.com/item/32751090379.html) |
+| **JST-XH 2.54mm Connector Kit** (560pcs, 2–6 pin housings + crimps + headers) | StepperConnection1 | ~$8–12 | Search `JST-XH 2.54mm kit 560pcs` |
+| **JST-EH 2.5mm 3-pin Kit** (housing + crimps + header) | SW1 | ~$4–6 | Search `JST-EH 2.5mm 3-pin housing crimp` |
+
+> **Why the kit approach:** R3 (30.1K) and R4 (190K) are E96 values that aren't in basic E24 kits. Buying a proper E96 sample book is cheaper than ordering five individual reels and means you'll have every standard value for future projects.
+
+---
+
+## Single-Part Key Items
+
+Parts that can't be combo'd — order these individually:
+
+| Ref | Part | Source | Price | Notes |
+|-----|------|--------|------:|-------|
+| **U1** | TPS61088RHLR | [LCSC C87357](https://www.lcsc.com/product-detail/DC-DC-Converters_TI_TPS61088RHLR_TPS61088RHLR_C87357.html) | ~$0.61 | 14k in stock. Drop-in for the Q1 variant on the silkscreen. |
+| **L1** | TDK SPM10065VT-2R2M-D (2.2µH, 16.6A) | [LCSC C1015860](https://www.lcsc.com/product-detail/Inductors-SMD_TDK-SPM10065VT-2R2M-D_C1015860.html) | ~$1.50 | Cheaper alternative to Bourns SRP1265. **Verify footprint match.** |
+| **L1 (alt)** | Bourns SRP1265A-2R2M (2.2µH, 22A) | DigiKey | ~$2–3 | Matches original BOM footprint exactly. |
+| **C3** | 100µF 25V SMD electrolytic, 6.3×5.8mm | AliExpress 10-pack | ~$2–3 | JAMICON/Lelon equivalents are fine. Verify pad layout. |
+| **A4988** | Stepper driver module + heatsink, 5-pack | AliExpress | ~$5–8 | Any reputable seller. Heatsinks included. |
+| **MotorPower1** | KF301-5.0-3P screw terminal, 10-pack | [AliExpress](https://www.aliexpress.com/item/32842003333.html) | ~$0.70 | Generic part. |
+
+---
+
+## Full BOM (with Purchase column)
+
+### Active components
+
+| Ref | Value | Pkg | Qty | Purchase | Notes |
+|-----|-------|-----|----:|----------|-------|
+| ESP32-WROOM1 | ESP32-C3-DevKitM-1 | Module | 1 | **SKIP** — user sources separately | Pinout-specific module from a special supplier. Do not order. |
+| A4988 | A4988 Driver | Pololu breakout | 1 | AliExpress 5-pack (~$5–8) | Heatsink included. |
+| U1 | TPS61088RHLR | VQFN-20 4.5×3.5mm (RHL) | 1 | [LCSC C87357](https://www.lcsc.com/product-detail/DC-DC-Converters_TI_TPS61088RHLR_TPS61088RHLR_C87357.html) (~$0.61) | Non-Q1 substitute for `TPS61088QRHLRQ1` on PCB. |
+
+### Resistors — all covered by 0805 E96 sample book
+
+| Ref | Value | Pkg | Qty | Purchase | Notes |
+|-----|-------|-----|----:|----------|-------|
+| R1 | 10K | 0805 1% | 1 | E96 kit | Pull-up / standard. |
+| R2 | 10K | 0805 1% | 1 | E96 kit | |
+| R5 | 10K | 0805 1% | 1 | E96 kit | |
+| R3 | 30.1K | 0805 1% | 1 | E96 kit | Feedback divider — must be 1%. |
+| R4 | 190K | 0805 1% | 1 | E96 kit | Feedback divider — must be 1%. |
+
+### Capacitors — small values covered by 0805 ceramic kit
+
+| Ref | Value | Pkg | Qty | Purchase | Notes |
+|-----|-------|-----|----:|----------|-------|
+| C8 | 47pF | 0805 C0G/NP0 50V | 1 | 0805 ceramic kit | C0G preferred, X7R OK at this value. |
+| C9 | 100nF | 0805 X7R 50V | 1 | 0805 ceramic kit | Decoupling. |
+| C6 | 22nF | 0805 X7R 50V | 1 | 0805 ceramic kit | TPS61088 compensation cap. |
+
+### Capacitors — bulk (all covered by one 50-pack)
+
+| Ref | Value | Pkg | Qty | Purchase | Notes |
+|-----|-------|-----|----:|----------|-------|
+| C4 | 22µF | 1206 X5R 25V | 1 | [AliExpress 50-pack](https://www.aliexpress.com/item/32751090379.html) (~$8) | CL31A226KAHNNNE ≡ GRM31CR61E226KE15L. **25V+ required** (12V output rail). |
+| C5 | 22µF | 1206 X5R 25V | 1 | Same 50-pack | |
+| C10 | 22µF | 1206 X5R 25V | 1 | Same 50-pack | |
+| C11 | 22µF | 1206 X5R 25V | 1 | Same 50-pack | |
+
+### Single-part caps & inductor
+
+| Ref | Value | Pkg | Qty | Purchase | Notes |
+|-----|-------|-----|----:|----------|-------|
+| C3 | 100µF | SMD aluminum electrolytic, 6.3×5.8mm, 25V | 1 | AliExpress 10-pack (~$2–3) | Verify pad layout matches KiCad `CP_Elec_6.3x5.8` footprint. |
+| L1 | 2.2µH | Shielded SMD power inductor | 1 | [LCSC TDK SPM10065VT-2R2M-D](https://www.lcsc.com/product-detail/Inductors-SMD_TDK-SPM10065VT-2R2M-D_C1015860.html) (~$1.50) **or** Bourns SRP1265A-2R2M (~$3) | **CRITICAL: must handle ≥10A.** Avoid no-name AliExpress inductors — saturation current often misrated. Footprint differs between TDK and Bourns. |
+
+### Connectors & terminals
+
+| Ref | Value | Pkg | Qty | Purchase | Notes |
+|-----|-------|-----|----:|----------|-------|
+| SW1 | B3B-EH-A | JST EH 3-pin THT, 2.5mm pitch | 1 | JST-EH 2.5mm 3-pin kit (~$4–6) | Get the kit — you need matching housings + crimps too. **EH series, not XH.** |
+| MotorPower1 | KF301-5.0-3P | 3-pin screw terminal, 5mm pitch THT | 1 | [AliExpress 10-pack](https://www.aliexpress.com/item/32842003333.html) (~$0.70) | Generic; any KF301-5.0-3P works. |
+| StepperConnection1 | B4B-XH-A | JST XH 4-pin THT, 2.54mm pitch | 1 | JST-XH 2.54mm kit (~$8–12) | Get the multi-pin kit; covers this build + future projects. |
+
+---
+
+## Sources
+
+- [TPS61088 product page (TI)](https://www.ti.com/product/TPS61088/part-details/TPS61088RHLR)
+- [LCSC TPS61088RHLR (C87357)](https://www.lcsc.com/product-detail/DC-DC-Converters_TI_TPS61088RHLR_TPS61088RHLR_C87357.html)
+- [LCSC TDK SPM10065VT-2R2M-D (C1015860)](https://www.lcsc.com/product-detail/Inductors-SMD_TDK-SPM10065VT-2R2M-D_C1015860.html)
+- [AliExpress 22µF 25V 1206 50-pack](https://www.aliexpress.com/item/32751090379.html)
+- [AliExpress KF301-5.0-3P 10-pack](https://www.aliexpress.com/item/32842003333.html)
+- [Amazon 170-value 0805 E96 1% resistor sample book](https://www.amazon.com/Resistor-ohm-10M-Assorted-Resistance-Resistor-0805/dp/B09Z2RDW2F)
+- [Bourns SRP1265A-2R2M datasheet](https://bourns.com/products/magnetic-products/details/power-inductors-smd-high-current-shielded/srp1265a)

bom.csv

@@ -0,0 +1,39 @@
+Reference,Component,Value,Qty,Package,AliExpress Search/Link,AliExpress Price Est.,DigiKey Part Number,DigiKey Price Est.,Purchase,Notes
+ESP32-WROOM1,ESP32-WROOM-32 DevKit,ESP32-C3-DevKitM-1,1,Module,"ESP32 WROOM 32 development board 30 pin",~$4.00,N/A (use Adafruit/SparkFun),,SKIP - user sources separately,Pinout-specific module sourced from special supplier. Do not order.
+A4988,A4988 Stepper Motor Driver,Pololu_Breakout_A4988,1,Module,"A4988 stepper motor driver module heatsink",~$2.00,Pololu #1182,~$5.95,"AliExpress 5-pack: https://www.aliexpress.com/wholesale?SearchText=A4988+stepper+driver+5pcs (~$5-8 for 5pcs with heatsinks)",Get the 5-pack from any AliExpress seller; quality varies but functional. Heatsinks included.
+U1,TPS61088 Boost Converter IC,TPS61088RHLR,1,VQFN-20 4.5x3.5mm (RHL),"TPS61088RHLR QFN20",~$2.28/ea (3pcs min ~$6.84),296-40481-1-ND,~$3.89,"LCSC C87357: https://www.lcsc.com/product-detail/DC-DC-Converters_TI_TPS61088RHLR_TPS61088RHLR_C87357.html (~$0.61/ea, 14k in stock)",PACKAGE CORRECTION: TPS61088 RHL is 4.5x3.5mm not 3.5x3.5mm. PCB silkscreen says TPS61088QRHLRQ1 (auto Q1) but non-Q1 TPS61088RHLR is drop-in substitute with identical pinout - use the cheaper non-Q1. Pinout verified: pins 1/3/4/5/6/7/8/9/11/12/15 = VIN/EN/SS-TR/COMP/FB/AGND/PGOOD/VOUT/BST/SW/PGND.
+R1,Resistor 0805 1%,10K,1,0805,"0805 resistor 10K 1%",~$1.50/100pcs,RC0805FR-0710KL,~$0.10,"COMBO: 0805 E96 1% resistor sample book (170 values x 25pcs, ~$25 covers R1+R2+R3+R4+R5 and lifetime supply)",Use combo kit - see Notes section below.
+R2,Resistor 0805 1%,10K,1,0805,"0805 resistor 10K 1%",~$1.50/100pcs,RC0805FR-0710KL,~$0.10,COVERED BY RESISTOR KIT,Use the 0805 E96 sample book.
+R5,Resistor 0805 1%,10K,1,0805,"0805 resistor 10K 1%",~$1.50/100pcs,RC0805FR-0710KL,~$0.10,COVERED BY RESISTOR KIT,Use the 0805 E96 sample book.
+R3,Resistor 0805 1% (feedback divider),30.1K,1,0805,"0805 resistor 30.1K 1% SMD",~$1.50/100pcs,RC0805FR-0730K1L,~$0.10,"COVERED BY 170-value E96 kit (30.1K is E96 standard value)",E96 standard - in any decent E96 kit like Amazon B09Z2RDW2F. If buying singles: LCSC.
+R4,Resistor 0805 1% (feedback divider),190K,1,0805,"0805 resistor 190K 1% SMD",~$1.50/100pcs,RC0805FR-07190KL,~$0.10,"COVERED BY 170-value E96 kit (190K is E96 standard value)",E96 standard - in any decent E96 kit. Critical to feedback divider - must be 1%.
+C8,Capacitor 0805 C0G/NP0 50V,47pF,1,0805,"0805 47pF capacitor C0G",~$1.00/100pcs,Standard YAGEO/Samsung,~$0.10,"COMBO: 0805 SMD ceramic capacitor kit covering 22nF/47pF/100nF (e.g. AliExpress 0603/0805/1206 50V 22p-22uF kit, ~$5)",Use combo cap kit - C0G preferred but X7R acceptable at this value.
+C9,Capacitor 0805 X7R 50V,100nF,1,0805,"0805 100nF 0.1uF capacitor",~$1.00/100pcs,Standard YAGEO/Samsung,~$0.10,COVERED BY CAPACITOR KIT,Universal decoupling value - included in every cap kit.
+C6,Capacitor 0805 X7R 50V,22nF,1,0805,"0805 22nF capacitor X7R",~$1.00/100pcs,Standard YAGEO/Samsung,~$0.10,COVERED BY CAPACITOR KIT,Compensation cap - tolerance not critical.
+C4,Capacitor 1206 X5R 25V,22uF,1,1206,"1206 SMD capacitor 22uF 25V",~$2.50/100pcs,GRM31CR61E226KE15L,~$0.50,"AliExpress 50-pack CL31A226KAHNNNE: https://www.aliexpress.com/item/32751090379.html (~$8/50pcs) - one order covers C4/C5/C10/C11",Samsung CL31A226KAHNNNE is direct equivalent to Murata GRM31CR61E226KE15L. Must be 25V+ (12V output bus).
+C5,Capacitor 1206 X5R 25V,22uF,1,1206,"1206 SMD capacitor 22uF 25V",~$2.50/100pcs,GRM31CR61E226KE15L,~$0.50,COVERED BY 50-PACK ABOVE,Same as C4 - one 50-pack covers all four positions.
+C10,Capacitor 1206 X5R 25V,22uF,1,1206,"1206 SMD capacitor 22uF 25V",~$2.50/100pcs,GRM31CR61E226KE15L,~$0.50,COVERED BY 50-PACK ABOVE,Same as C4.
+C11,Capacitor 1206 X5R 25V,22uF,1,1206,"1206 SMD capacitor 22uF 25V",~$2.50/100pcs,GRM31CR61E226KE15L,~$0.50,COVERED BY 50-PACK ABOVE,Same as C4.
+C3,Capacitor SMD Electrolytic 25V,100uF,1,6.3x5.8mm,"100uF 25V SMD aluminum electrolytic capacitor 6.3mm",~$1.30/20pcs,Standard Nichicon/Panasonic,~$0.50,"AliExpress 10-pack: search '100uF 25V SMD 6.3x5.8mm' (~$2-3 for 10pcs). LCSC: Lelon VEJ101M1EQRJ ~$0.15/ea",Verify pad layout matches KiCad footprint (CP_Elec_6.3x5.8). Cheaper SMD electrolytics from JAMICON/Lelon are fine.
+L1,Power Inductor Shielded SMD,2.2uH,1,12.6x12.6mm,"SRP1265 2.2uH inductor",~$3.00,SRP1265A-2R2M (Bourns),~$2-3,"BEST: LCSC TDK SPM10065VT-2R2M-D C1015860 (10.5x10mm, 16.6A, ~$1.50). Alt: DigiKey Bourns SRP1265A-2R2M (12.6x12.6mm, 22A, ~$3)",CRITICAL - must handle >=10A continuous. TDK SPM10065 is smaller and cheaper than Bourns SRP1265 - verify your KiCad footprint matches the chosen part's pad pattern BEFORE ordering. Avoid no-name AliExpress inductors - saturation current is often misrated.
+SW1,JST EH 3-pin Header,B3B-EH-A,1,Through-hole,"JST EH 3 pin connector 2.5mm header",~$1.00/10pcs,B3B-EH-A(LF)(SN),~$0.13,"AliExpress JST-EH 2.5mm 3-pin kit with housing+crimps (50-set ~$4-6, search 'JST-EH 2.5mm 3-pin housing crimp')",Make sure to get matching female housings and crimp terminals - not just the PCB header. EH series specifically (NOT XH or PH).
+MotorPower1,Screw Terminal 3-pin 5mm pitch,KF301-5.0-3P,1,Through-hole,"KF301 3 pin 5mm screw terminal PCB",~$0.50-1.00,Standard part,~$0.50-1.00,"AliExpress 10-pack: https://www.aliexpress.com/item/32842003333.html (~$0.70/10pcs)",Generic Chinese part - any KF301-5.0-3P seller works.
+StepperConnection1,JST XH 4-pin Header,B4B-XH-A,1,Through-hole,"JST XH 4 pin 2.54mm connector header",~$1.00/20pcs,B4B-XH-A(LF)(SN),~$0.15,"COMBO: AliExpress JST-XH 2.54mm full kit (560pcs 2/3/4/5/6-pin housing+crimps+headers, ~$8-12) - massive overkill but covers all future projects",Search 'JST-XH 2.54mm connector kit 560pcs'. Brand names: Taiss, GTIWUNG, HALJIA all sell equivalent kits.
+,,,,,,,,,,
+SUMMARY,,,,,,,,,,
+,,,,,,,,,,
+COMBO PACK RECOMMENDATIONS:,,,,,,,,,,
+"1. 0805 E96 1% Resistor Sample Book (170 values x 25pcs)",,,,,,,,,~$15-25,Covers R1/R2/R3/R4/R5 + every future project. Must be E96 (1%) to include 30.1K and 190K.
+"2. 0805 SMD Ceramic Capacitor Kit (50V, 22pF-22uF range)",,,,,,,,,~$5-15,Covers C6/C8/C9 (22nF/47pF/100nF). Make sure kit includes those specific values.
+"3. 1206 22uF 25V X5R 50-pack",,,,,,,,,~$8,Covers C4/C5/C10/C11.
+"4. JST-XH 2.54mm Connector Kit (multi-pin)",,,,,,,,,~$8-12,Covers StepperConnection1 (4-pin) + future projects.
+"5. JST-EH 2.5mm 3-pin Kit (housing+crimps+header)",,,,,,,,,~$4-6,Covers SW1. Make sure it's EH series specifically.
+,,,,,,,,,,
+SINGLE-PART KEY ITEMS:,,,,,,,,,,
+"U1 TPS61088RHLR - LCSC C87357",,,,,,,,,~$0.61,The non-Q1 variant is drop-in substitute for TPS61088QRHLRQ1 on PCB silkscreen. Same RHL package same pinout.
+"L1 TDK SPM10065VT-2R2M-D - LCSC C1015860",,,,,,,,,~$1.50,VERIFY footprint match before ordering - SPM10065 (10.5x10mm) vs original Bourns SRP1265 (12.6x12.6mm).
+"C3 100uF 25V SMD electrolytic - any 6.3x5.8mm 10-pack",,,,,,,,,~$2-3,Verify pad layout matches your KiCad footprint.
+"A4988 5-pack with heatsinks - AliExpress",,,,,,,,,~$5-8,Generic functional drivers.
+"KF301-5.0-3P 10-pack - AliExpress",,,,,,,,,~$0.70,Generic part.
+,,,,,,,,,,
+TOTAL ESTIMATED COST:,,,,,,,,,~$50-80,One-time setup with combo kits. ~$10 in actually-used parts per board. ESP32 module sourced separately by user.

firstpcb-drc.rpt

@@ -0,0 +1,38 @@
+** Drc report for firstpcb.kicad_pcb **
+** Created on 2026-05-15T16:12:52 **
+** Report includes: Errors, Warnings, Exclusions **
+
+** Found 6 DRC violations **
+[lib_footprint_mismatch]: Footprint 'MountingHole_2.2mm_M2' does not match copy in library 'MountingHole'
+    Local override; warning
+    @(138.0000 mm, 97.0000 mm): Footprint MH4
+[lib_footprint_mismatch]: Footprint 'MountingHole_2.2mm_M2' does not match copy in library 'MountingHole'
+    Local override; warning
+    @(138.0000 mm, 43.0000 mm): Footprint MH2
+[lib_footprint_issues]: The current configuration does not include the footprint library 'Library'
+    Local override; warning
+    @(65.0000 mm, 53.3600 mm): Footprint ESP32-WROOM1
+[lib_footprint_mismatch]: Footprint 'RHL0020A' does not match copy in library 'Project'
+    Local override; warning
+    @(118.2250 mm, 77.4750 mm): Footprint U2
+[lib_footprint_mismatch]: Footprint 'MountingHole_2.2mm_M2' does not match copy in library 'MountingHole'
+    Local override; warning
+    @(63.0000 mm, 43.0000 mm): Footprint MH1
+[lib_footprint_mismatch]: Footprint 'MountingHole_2.2mm_M2' does not match copy in library 'MountingHole'
+    Local override; warning
+    @(63.0000 mm, 97.0000 mm): Footprint MH3
+
+** Found 0 unconnected pads **
+
+** Found 0 Footprint errors **
+
+** Ignored checks **
+    - Footprint has no courtyard defined
+    - Track endpoint not centered on via
+    - Tuning profile track geometries
+    - Footprint doesn't match symbol's footprint filters
+    - PTH inside courtyard
+    - NPTH inside courtyard
+    - Footprint component type doesn't match footprint pads
+
+** End of Report **

firstpcb-erc.rpt

@@ -0,0 +1,83 @@
+ERC report (2026-04-20T17:48:43-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[lib_symbol_mismatch]: Symbol 'TPS61088' doesn't match copy in library 'TPS61088'
+    ; warning
+    @(80.01 mm, 140.97 mm): Symbol U1 [TPS61088]
+
+ ** ERC messages: 26  Errors 22  Warnings 4

firstpcb.kicad_prl

@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 21,
+    "active_layer": 0,
     "active_layer_preset": "",
     "auto_track_width": true,
     "hidden_netclasses": [],
@@ -15,6 +15,7 @@
       "vias": 1.0,
       "zones": 0.6
     },
+    "prototype_zone_fills": false,
     "selection_filter": {
       "dimensions": true,
       "footprints": true,
@@ -54,6 +55,7 @@
     "zone_display_mode": 0
   },
   "git": {
+    "integration_disabled": false,
     "repo_type": "",
     "repo_username": "",
     "ssh_key": ""
@@ -88,16 +90,16 @@
       9
     ],
     "col_widths": [
-      0,
+      69,
-      0,
+      71,
-      0,
+      94,
-      0,
+      78,
-      0,
+      84,
-      0,
+      97,
-      0,
+      85,
-      0,
+      80,
-      0,
+      42,
-      0
+      678
     ],
     "custom_group_rules": [],
     "expanded_rows": [],
@@ -106,16 +108,18 @@
     "filter_text": "",
     "group_by_constraint": false,
     "group_by_netclass": false,
+    "show_time_domain_details": false,
     "show_unconnected_nets": false,
     "show_zero_pad_nets": false,
-    "sort_ascending": true,
+    "sort_ascending": false,
-    "sorting_column": 0
+    "sorting_column": 7
   },
   "open_jobsets": [],
   "project": {
     "files": []
   },
   "schematic": {
+    "hierarchy_collapsed": [],
     "selection_filter": {
       "graphics": true,
       "images": true,
@@ -123,6 +127,7 @@
       "lockedItems": false,
       "otherItems": true,
       "pins": true,
+      "ruleAreas": true,
       "symbols": true,
       "text": true,
       "wires": true

firstpcb.kicad_pro

@@ -3,6 +3,8 @@
     "3dviewports": [],
     "design_settings": {
       "defaults": {
+        "apply_defaults_to_fp_barcodes": false,
+        "apply_defaults_to_fp_dimensions": false,
         "apply_defaults_to_fp_fields": false,
         "apply_defaults_to_fp_shapes": false,
         "apply_defaults_to_fp_text": false,
@@ -77,6 +79,7 @@
         "extra_footprint": "warning",
         "footprint": "error",
         "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_field_mismatch": "warning",
         "footprint_symbol_mismatch": "warning",
         "footprint_type_mismatch": "ignore",
         "hole_clearance": "error",
@@ -94,6 +97,7 @@
         "mirrored_text_on_front_layer": "warning",
         "missing_courtyard": "ignore",
         "missing_footprint": "warning",
+        "missing_tuning_profile": "warning",
         "net_conflict": "warning",
         "nonmirrored_text_on_back_layer": "warning",
         "npth_inside_courtyard": "ignore",
@@ -113,9 +117,12 @@
         "too_many_vias": "error",
         "track_angle": "error",
         "track_dangling": "warning",
+        "track_not_centered_on_via": "ignore",
+        "track_on_post_machined_layer": "error",
         "track_segment_length": "error",
         "track_width": "error",
         "tracks_crossing": "error",
+        "tuning_profile_track_geometries": "ignore",
         "unconnected_items": "error",
         "unresolved_variable": "error",
         "via_dangling": "warning",
@@ -224,17 +231,28 @@
       "zones_allow_external_fillets": false
     },
     "ipc2581": {
+      "bom_rev": "",
       "dist": "",
       "distpn": "",
       "internal_id": "",
       "mfg": "",
-      "mpn": ""
+      "mpn": "",
+      "sch_revision": ""
     },
     "layer_pairs": [],
     "layer_presets": [],
     "viewports": []
   },
   "boards": [],
+  "component_class_settings": {
+    "assignments": [],
+    "meta": {
+      "version": 0
+    },
+    "sheet_component_classes": {
+      "enabled": false
+    }
+  },
   "cvpcb": {
     "equivalence_files": []
   },
@@ -424,11 +442,14 @@
       "duplicate_sheet_names": "error",
       "endpoint_off_grid": "warning",
       "extra_units": "error",
+      "field_name_whitespace": "warning",
       "footprint_filter": "ignore",
       "footprint_link_issues": "warning",
       "four_way_junction": "ignore",
       "global_label_dangling": "warning",
+      "ground_pin_not_ground": "warning",
       "hier_label_mismatch": "error",
+      "isolated_pin_label": "warning",
       "label_dangling": "error",
       "label_multiple_wires": "warning",
       "lib_symbol_issues": "warning",
@@ -441,9 +462,9 @@
       "net_not_bus_member": "warning",
       "no_connect_connected": "warning",
       "no_connect_dangling": "warning",
-      "pin_not_connected": "error",
+      "pin_not_connected": "ignore",
       "pin_not_driven": "error",
-      "pin_to_pin": "warning",
+      "pin_to_pin": "error",
       "power_pin_not_driven": "error",
       "same_local_global_label": "warning",
       "similar_label_and_power": "warning",
@@ -451,6 +472,7 @@
       "similar_power": "warning",
       "simulation_model_issue": "ignore",
       "single_global_label": "ignore",
+      "stacked_pin_name": "warning",
       "unannotated": "error",
       "unconnected_wire_endpoint": "warning",
       "undefined_netclass": "error",
@@ -483,13 +505,14 @@
         "priority": 2147483647,
         "schematic_color": "rgba(0, 0, 0, 0.000)",
         "track_width": 0.2,
+        "tuning_profile": "",
         "via_diameter": 0.6,
         "via_drill": 0.3,
         "wire_width": 6
       }
     ],
     "meta": {
-      "version": 4
+      "version": 5
     },
     "net_colors": null,
     "netclass_assignments": null,
@@ -516,6 +539,10 @@
   },
   "schematic": {
     "annotate_start_num": 0,
+    "annotation": {
+      "method": 0,
+      "sort_order": 0
+    },
     "bom_export_filename": "${PROJECTNAME}.csv",
     "bom_fmt_presets": [],
     "bom_fmt_settings": {
@@ -587,6 +614,7 @@
       "sort_asc": true,
       "sort_field": "Reference"
     },
+    "bus_aliases": {},
     "connection_grid_size": 50.0,
     "drawing": {
       "dashed_lines_dash_length_ratio": 12.0,
@@ -594,6 +622,7 @@
       "default_line_thickness": 6.0,
       "default_text_size": 50.0,
       "field_names": [],
+      "hop_over_size_choice": 0,
       "intersheets_ref_own_page": false,
       "intersheets_ref_prefix": "",
       "intersheets_ref_short": false,
@@ -615,8 +644,17 @@
       "version": 1
     },
     "net_format_name": "",
+    "ngspice": {
+      "fix_include_paths": true,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 4,
+      "workbook_filename": ""
+    },
     "page_layout_descr_file": "",
     "plot_directory": "",
+    "reuse_designators": true,
     "space_save_all_events": true,
     "spice_current_sheet_as_root": false,
     "spice_external_command": "spice \"%I\"",
@@ -625,13 +663,28 @@
     "spice_save_all_dissipations": false,
     "spice_save_all_voltages": false,
     "subpart_first_id": 65,
-    "subpart_id_separator": 0
+    "subpart_id_separator": 0,
+    "top_level_sheets": [
+      {
+        "filename": "firstpcb.kicad_sch",
+        "name": "firstpcb",
+        "uuid": "4ce690e5-6d5b-4693-bd2e-f4090f26df1f"
+      }
+    ],
+    "used_designators": "",
+    "variants": []
   },
   "sheets": [
     [
       "4ce690e5-6d5b-4693-bd2e-f4090f26df1f",
-      "Root"
+      "firstpcb"
     ]
   ],
-  "text_variables": {}
+  "text_variables": {},
+  "tuning_profiles": {
+    "meta": {
+      "version": 0
+    },
+    "tuning_profiles_impedance_geometric": []
+  }
 }

firstpcb_test-erc.rpt

@@ -0,0 +1,86 @@
+ERC report (2026-04-20T17:40:53-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+
+ ** ERC messages: 27  Errors 23  Warnings 4

firstpcb_test2-erc.rpt

@@ -0,0 +1,86 @@
+ERC report (2026-04-20T17:35:51-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+
+ ** ERC messages: 27  Errors 23  Warnings 4

firstpcb_test3-erc.rpt

@@ -0,0 +1,137 @@
+ERC report (2026-04-20T17:36:10-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(40.64 mm, 77.47 mm): Symbol #PWR08 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 130.81 mm): Symbol U1 Pin 1 [VIN, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(67.31 mm, 130.81 mm): Symbol U1 Pin 1 [VIN, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 135.89 mm): Symbol U1 Pin 3 [EN, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 135.89 mm): Symbol U1 Pin 3 [EN, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 140.97 mm): Symbol U1 Pin 4 [SS/TR, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 130.81 mm): Symbol U1 Pin 12 [SW, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 146.05 mm): Symbol U1 Pin 5 [COMP, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 135.89 mm): Symbol U1 Pin 11 [BST, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 140.97 mm): Symbol U1 Pin 9 [VOUT, Power output, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 146.05 mm): Symbol U1 Pin 8 [PGOOD, Open collector, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(74.93 mm, 156.21 mm): Symbol U1 Pin 7 [AGND, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(74.93 mm, 156.21 mm): Symbol U1 Pin 7 [AGND, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(80.01 mm, 156.21 mm): Symbol U1 Pin 15 [PGND, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(80.01 mm, 156.21 mm): Symbol U1 Pin 15 [PGND, Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'TPS61088'
+    ; warning
+    @(80.01 mm, 140.97 mm): Symbol U1 [TPS61088]
+
+ ** ERC messages: 44  Errors 39  Warnings 5

fp-lib-table

@@ -1,4 +1,158 @@
 (fp_lib_table
-  (version 7)
+  (lib (name "Audio_Module")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Audio_Module.pretty")(options "")(descr "Standard KiCad library"))
-  (lib (name "Library")(type "KiCad")(uri "${KIPRJMOD}/Library.pretty")(options "")(descr ""))
+  (lib (name "Battery")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Battery.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Button_Switch_Keyboard")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Button_Switch_Keyboard.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Button_Switch_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Button_Switch_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Button_Switch_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Button_Switch_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Buzzer_Beeper")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Buzzer_Beeper.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Calibration_Scale")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Calibration_Scale.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Capacitor_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Capacitor_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Capacitor_Tantalum_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Capacitor_Tantalum_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Capacitor_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Capacitor_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_AMASS")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_AMASS.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Amphenol")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Amphenol.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Audio")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Audio.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_BarrelJack")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_BarrelJack.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Card")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Card.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Coaxial")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Coaxial.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_DIN")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_DIN.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Dsub")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Dsub.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_FFC-FPC")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_FFC-FPC.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Harting")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Harting.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Harwin")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Harwin.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Hirose_DF40")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Hirose_DF40.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Hirose_FX8")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Hirose_FX8.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Hirose")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Hirose.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_IDC")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_IDC.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_JAE")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_JAE.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_JAE_WP7B")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_JAE_WP7B.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_JST")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_JST.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Molex_Milligrid")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Molex_Milligrid.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Molex")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Molex.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PCBEdge")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PCBEdge.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Phoenix_GMSTB")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Phoenix_GMSTB.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Phoenix_MC_HighVoltage")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Phoenix_MC_HighVoltage.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Phoenix_MC")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Phoenix_MC.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Phoenix_MSTB")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Phoenix_MSTB.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Phoenix_SPT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Phoenix_SPT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinHeader_1.00mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinHeader_1.00mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinHeader_1.27mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinHeader_1.27mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinHeader_2.00mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinHeader_2.00mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinHeader_2.54mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinHeader_2.54mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Pin")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Pin.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinSocket_1.00mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinSocket_1.00mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinSocket_1.27mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinSocket_1.27mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinSocket_2.00mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinSocket_2.00mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_PinSocket_2.54mm")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_PinSocket_2.54mm.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_RJ")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_RJ.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_EdgeRate")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_EdgeRate.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_FSI")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_FSI.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_HLE_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_HLE_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_HLE_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_HLE_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_HPM_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_HPM_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_HSEC8")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_HSEC8.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_LTMM")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_LTMM.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_MicroMate")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_MicroMate.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec_MicroPower")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec_MicroPower.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Samtec")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Samtec.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_SATA_SAS")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_SATA_SAS.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Stocko")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Stocko.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_TE-Connectivity")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_TE-Connectivity.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_USB")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_USB.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Video")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Video.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Wago")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Wago.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Wire")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Wire.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Wuerth")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Wuerth.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Zhaoxing")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Connector_Zhaoxing.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Converter_ACDC")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Converter_ACDC.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Converter_DCDC.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Crystal")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Crystal.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Diode_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Diode_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Diode_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Diode_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Display_7Segment")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Display_7Segment.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Display")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Display.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Ferrite_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Ferrite_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Fiducial")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Fiducial.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Filter")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Filter.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Fuse")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Fuse.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Heatsink")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Heatsink.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Inductor_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Inductor_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Inductor_SMD_Wurth")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Inductor_SMD_Wurth.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Inductor_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Inductor_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Inductor_THT_Wurth")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Inductor_THT_Wurth.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Jumper")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Jumper.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "LED_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/LED_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "LED_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/LED_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Module")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Module.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Motors")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Motors.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "MountingEquipment")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/MountingEquipment.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "MountingHole")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/MountingHole.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Mounting_Wuerth")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Mounting_Wuerth.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "NetTie")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/NetTie.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "OptoDevice")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/OptoDevice.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Oscillator")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Oscillator.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_BGA")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_BGA.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_CSP")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_CSP.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_DFN_QFN")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_DFN_QFN.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_DIP")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_DIP.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_DirectFET")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_DirectFET.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_LCC")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_LCC.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_LGA")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_LGA.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_QFP")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_QFP.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_SIP")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_SIP.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_SO_J-Lead")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_SO_J-Lead.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_SON")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_SON.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_SO")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_SO.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_TO_SOT_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_TO_SOT_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Package_TO_SOT_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Package_TO_SOT_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Panelization")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Panelization.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Potentiometer_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Potentiometer_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Potentiometer_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Potentiometer_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Relay_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Relay_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Relay_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Relay_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Resistor_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Resistor_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Resistor_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Resistor_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Antenna")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_Antenna.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Converter")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_Converter.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_GPS")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_GPS.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_GSM")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_GSM.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Mini-Circuits")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_Mini-Circuits.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Module")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_Module.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Shielding")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_Shielding.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_WiFi")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/RF_WiFi.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Rotary_Encoder")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Rotary_Encoder.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Audio")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Audio.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Current")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Current.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Distance")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Distance.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Humidity")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Humidity.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Motion")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Motion.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Pressure")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Pressure.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Voltage")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Sensor_Voltage.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Socket")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Socket.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Symbol")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Symbol.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_4Ucon")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_4Ucon.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Altech")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Altech.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_CUI")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_CUI.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Degson")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Degson.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Dinkle")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Dinkle.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_MetzConnect")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_MetzConnect.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Ningbo-Kagnex")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Ningbo-Kagnex.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Philmore")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Philmore.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Phoenix")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Phoenix.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_RND")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_RND.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_TE-Connectivity")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_TE-Connectivity.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_WAGO")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_WAGO.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TerminalBlock_Wuerth")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TerminalBlock_Wuerth.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "TestPoint")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/TestPoint.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transformer_SMD")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Transformer_SMD.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transformer_THT")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Transformer_THT.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_Power_Module")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Transistor_Power_Module.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_Power")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Transistor_Power.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Valve")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Valve.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Varistor")(type "KiCad")(uri "${KICAD10_FOOTPRINT_DIR}/Varistor.pretty")(options "")(descr "Standard KiCad library"))
+  (lib (name "Project")(type "KiCad")(uri "${KICAD_PROJECT_FOOTPRINT_DIR}/Project.pretty")(options "")(descr "Project library"))
 )

integrate_boost.py

@@ -0,0 +1,772 @@
+#!/usr/bin/env python3
+"""
+Transform firstpcb.kicad_sch:
+  1. Remove the L7805 voltage regulator and associated components
+  2. Insert the TPS61088 5V→12V boost converter circuit
+  3. Keep all other components intact
+
+The +5V and +12V nets connect automatically via KiCad global power symbols.
+"""
+
+import re
+import uuid
+import sys
+
+
+def uid():
+    return str(uuid.uuid4())
+
+
+ROOT_UUID = "4ce690e5-6d5b-4693-bd2e-f4090f26df1f"
+
+
+# ── UUIDs of components to REMOVE (L7805 circuit) ──
+
+REMOVE_UUIDS = {
+    # L7805 regulator
+    "b5b8c784-5cbd-46af-b962-5f07e5e5ce66",
+    # C1 (0.33uF) - output cap
+    "be10cf51-2c79-49d9-968c-f16a919adeee",
+    # C2 (0.1uF) - input cap
+    "58617ce4-1b01-4ae9-be22-0491e474e52d",
+    # #PWR15 (+5V at L7805 output)
+    "dd887245-ee3f-48b0-ab57-caf2a8bdfdef",
+    # #PWR19 (+5V at C2)
+    "fd8b730d-5d7d-4216-98e6-0f769c039626",
+    # #PWR14 (+12V at L7805 input)
+    "ea5b2f5d-6233-46fc-93b4-4b52ebc256b5",
+    # #PWR17 (+12V at C1)
+    "ec47b49b-69a3-415f-b119-7b90e03df83a",
+    # #PWR16 (GND under L7805)
+    "940ddbc7-3e82-42b5-ad91-3df87e10ff89",
+    # #PWR18 (GND under C1)
+    "565f28b7-cc4b-427c-be9a-9e09337daabd",
+    # #PWR20 (GND under C2)
+    "e7fe0926-923d-41aa-92e6-413304613139",
+}
+
+REMOVE_WIRE_UUIDS = {
+    # Wire: C2 top to L7805 output rail
+    "dba247d2-ddb5-46ff-a6bd-5fb718c4599e",
+    # Wire: L7805 input to +12V symbol
+    "e3772378-2aa5-420d-92e3-94a8234f86b5",
+    # Wire: C1 to +12V symbol
+    "ee45c424-04dc-4913-92e9-0eec7ac6b273",
+    # Wire: L7805 output to +5V symbol
+    "48aefa74-f6f4-40ae-9135-90c2565ceadc",
+}
+
+# Also remove the L7805 lib_symbol definition
+REMOVE_LIB_SYMBOL = "Regulator_Linear:L7805"
+
+
+def find_block_end(text, start_pos):
+    """Find the end of a parenthesized block starting at start_pos.
+    start_pos should point to the opening '('."""
+    depth = 0
+    i = start_pos
+    while i < len(text):
+        if text[i] == '(':
+            depth += 1
+        elif text[i] == ')':
+            depth -= 1
+            if depth == 0:
+                return i
+        i += 1
+    return -1
+
+
+def remove_blocks_by_uuid(text, uuids):
+    """Remove top-level blocks (symbol, wire, junction) containing matching UUIDs."""
+    for u in uuids:
+        # Find the UUID in the text
+        pattern = f'(uuid "{u}")'
+        idx = text.find(pattern)
+        if idx == -1:
+            print(f"  WARNING: UUID {u} not found, skipping", file=sys.stderr)
+            continue
+
+        # Walk backward from UUID to find the containing block's opening
+        # Look for a tab-indented opening paren: \n\t(symbol, \n\t(wire, etc.
+        search_start = idx
+        block_start = -1
+        while search_start > 0:
+            # Find the previous newline
+            nl = text.rfind('\n', 0, search_start)
+            if nl == -1:
+                break
+            line = text[nl+1:search_start]
+            # Check if this line starts a top-level block
+            stripped = line.lstrip()
+            if stripped.startswith('(symbol') or stripped.startswith('(wire') or \
+               stripped.startswith('(junction') or stripped.startswith('(no_connect'):
+                block_start = nl + 1
+                # Find the start of the actual paren
+                paren_pos = text.index('(', block_start)
+                block_start = paren_pos
+                break
+            search_start = nl
+
+        if block_start == -1:
+            print(f"  WARNING: Could not find block start for UUID {u}", file=sys.stderr)
+            continue
+
+        block_end = find_block_end(text, block_start)
+        if block_end == -1:
+            print(f"  WARNING: Could not find block end for UUID {u}", file=sys.stderr)
+            continue
+
+        # Remove the block (including trailing newline)
+        end = block_end + 1
+        if end < len(text) and text[end] == '\n':
+            end += 1
+
+        # Also remove leading whitespace/tabs on the same line
+        while block_start > 0 and text[block_start-1] in '\t ':
+            block_start -= 1
+
+        print(f"  Removing block with UUID {u[:12]}... ({end - block_start} chars)")
+        text = text[:block_start] + text[end:]
+
+    return text
+
+
+def remove_lib_symbol(text, lib_id):
+    """Remove a lib_symbol definition from the lib_symbols section."""
+    pattern = f'(symbol "{lib_id}"'
+    idx = text.find(pattern)
+    if idx == -1:
+        print(f"  WARNING: lib_symbol {lib_id} not found", file=sys.stderr)
+        return text
+
+    # Find the containing (symbol block - walk back to find the right indentation
+    # In lib_symbols, entries are indented with two tabs
+    search = idx
+    while search > 0 and text[search-1] != '\n':
+        search -= 1
+    block_start = search
+
+    block_paren = text.index('(', block_start)
+    block_end = find_block_end(text, block_paren)
+
+    end = block_end + 1
+    if end < len(text) and text[end] == '\n':
+        end += 1
+
+    print(f"  Removing lib_symbol {lib_id}")
+    text = text[:block_start] + text[end:]
+    return text
+
+
+# ── TPS61088 boost converter circuit to INSERT ──
+
+def gen_symbol(lib_id, ref, value, x, y, rot=0, pins=None, extra_props=""):
+    """Generate a symbol placement block."""
+    u = uid()
+    if pins is None:
+        pins = {}
+    pin_str = ""
+    for pnum in sorted(pins.keys(), key=lambda k: int(k) if k.isdigit() else k):
+        pin_str += f'\t\t(pin "{pnum}"\n\t\t\t(uuid "{pins[pnum]}")\n\t\t)\n'
+
+    return f"""\t(symbol
+\t\t(lib_id "{lib_id}")
+\t\t(at {round(x, 2)} {round(y, 2)} {rot})
+\t\t(unit 1)
+\t\t(exclude_from_sim no)
+\t\t(in_bom yes)
+\t\t(on_board yes)
+\t\t(dnp no)
+\t\t(uuid "{u}")
+\t\t(property "Reference" "{ref}"
+\t\t\t(at {round(x + 2.54, 2)} {round(y - 2.54, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(justify left)
+\t\t\t)
+\t\t)
+\t\t(property "Value" "{value}"
+\t\t\t(at {round(x + 2.54, 2)} {round(y + 2.54, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(justify left)
+\t\t\t)
+\t\t)
+\t\t(property "Footprint" ""
+\t\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t)
+\t\t(property "Datasheet" ""
+\t\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t)
+\t\t(property "Description" ""
+\t\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t){extra_props}
+{pin_str}\t\t(instances
+\t\t\t(project ""
+\t\t\t\t(path "/{ROOT_UUID}"
+\t\t\t\t\t(reference "{ref}")
+\t\t\t\t\t(unit 1)
+\t\t\t\t)
+\t\t\t)
+\t\t)
+\t)"""
+
+
+def gen_pwr(lib_id, value, x, y, ref):
+    """Generate a power symbol block."""
+    return f"""\t(symbol
+\t\t(lib_id "{lib_id}")
+\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t(unit 1)
+\t\t(exclude_from_sim no)
+\t\t(in_bom yes)
+\t\t(on_board yes)
+\t\t(dnp no)
+\t\t(uuid "{uid()}")
+\t\t(property "Reference" "{ref}"
+\t\t\t(at {round(x, 2)} {round(y - 2.54, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t)
+\t\t(property "Value" "{value}"
+\t\t\t(at {round(x, 2)} {round(y + 3.81, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t)
+\t\t)
+\t\t(property "Footprint" ""
+\t\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t)
+\t\t(property "Datasheet" ""
+\t\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t)
+\t\t(property "Description" ""
+\t\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t\t(effects
+\t\t\t\t(font
+\t\t\t\t\t(size 1.27 1.27)
+\t\t\t\t)
+\t\t\t\t(hide yes)
+\t\t\t)
+\t\t)
+\t\t(pin "1"
+\t\t\t(uuid "{uid()}")
+\t\t)
+\t\t(instances
+\t\t\t(project ""
+\t\t\t\t(path "/{ROOT_UUID}"
+\t\t\t\t\t(reference "{ref}")
+\t\t\t\t\t(unit 1)
+\t\t\t\t)
+\t\t\t)
+\t\t)
+\t)"""
+
+
+def gen_wire(x1, y1, x2, y2):
+    return f"""\t(wire
+\t\t(pts
+\t\t\t(xy {round(x1, 2)} {round(y1, 2)}) (xy {round(x2, 2)} {round(y2, 2)})
+\t\t)
+\t\t(stroke
+\t\t\t(width 0)
+\t\t\t(type default)
+\t\t)
+\t\t(uuid "{uid()}")
+\t)"""
+
+
+def gen_junction(x, y):
+    return f"""\t(junction
+\t\t(at {round(x, 2)} {round(y, 2)})
+\t\t(diameter 0)
+\t\t(color 0 0 0 0)
+\t\t(uuid "{uid()}")
+\t)"""
+
+
+def gen_label(x, y, name, rot=0):
+    return f"""\t(label "{name}"
+\t\t(at {round(x, 2)} {round(y, 2)} {rot})
+\t\t(effects
+\t\t\t(font
+\t\t\t\t(size 1.27 1.27)
+\t\t\t)
+\t\t)
+\t\t(uuid "{uid()}")
+\t)"""
+
+
+def gen_no_connect(x, y):
+    return f"""\t(no_connect
+\t\t(at {round(x, 2)} {round(y, 2)})
+\t\t(uuid "{uid()}")
+\t)"""
+
+
+def gen_text(x, y, text):
+    return f"""\t(text "{text}"
+\t\t(exclude_from_sim no)
+\t\t(at {round(x, 2)} {round(y, 2)} 0)
+\t\t(effects
+\t\t\t(font
+\t\t\t\t(size 1.27 1.27)
+\t\t\t)
+\t\t\t(justify left)
+\t\t)
+\t\t(uuid "{uid()}")
+\t)"""
+
+
+# ── TPS61088 lib_symbol definition ──
+
+TPS61088_LIB_SYMBOL = """\t\t(symbol "TPS61088:TPS61088"
+\t\t\t(exclude_from_sim no)
+\t\t\t(in_bom yes)
+\t\t\t(on_board yes)
+\t\t\t(property "Reference" "U"
+\t\t\t\t(at 0 16.51 0)
+\t\t\t\t(effects (font (size 1.27 1.27)))
+\t\t\t)
+\t\t\t(property "Value" "TPS61088"
+\t\t\t\t(at 0 13.97 0)
+\t\t\t\t(effects (font (size 1.27 1.27)))
+\t\t\t)
+\t\t\t(property "Footprint" "Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2.1x2.1mm"
+\t\t\t\t(at 0 -20.32 0)
+\t\t\t\t(effects (font (size 1.27 1.27)) (hide yes))
+\t\t\t)
+\t\t\t(property "Datasheet" "https://www.ti.com/lit/ds/symlink/tps61088.pdf"
+\t\t\t\t(at 0 -22.86 0)
+\t\t\t\t(effects (font (size 1.27 1.27)) (hide yes))
+\t\t\t)
+\t\t\t(property "Description" "10A Fully-Integrated Synchronous Boost Converter"
+\t\t\t\t(at 0 -25.4 0)
+\t\t\t\t(effects (font (size 1.27 1.27)) (hide yes))
+\t\t\t)
+\t\t\t(symbol "TPS61088_0_1"
+\t\t\t\t(rectangle
+\t\t\t\t\t(start -10.16 12.7)
+\t\t\t\t\t(end 10.16 -12.7)
+\t\t\t\t\t(stroke (width 0.254) (type default))
+\t\t\t\t\t(fill (type background))
+\t\t\t\t)
+\t\t\t)
+\t\t\t(symbol "TPS61088_1_1"
+\t\t\t\t(pin power_in line
+\t\t\t\t\t(at -12.7 10.16 0) (length 2.54)
+\t\t\t\t\t(name "VIN" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "1" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin input line
+\t\t\t\t\t(at -12.7 5.08 0) (length 2.54)
+\t\t\t\t\t(name "EN" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "3" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin passive line
+\t\t\t\t\t(at -12.7 0 0) (length 2.54)
+\t\t\t\t\t(name "SS/TR" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "4" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin passive line
+\t\t\t\t\t(at -12.7 -5.08 0) (length 2.54)
+\t\t\t\t\t(name "COMP" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "5" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin input line
+\t\t\t\t\t(at -12.7 -10.16 0) (length 2.54)
+\t\t\t\t\t(name "FB" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "6" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin passive line
+\t\t\t\t\t(at 12.7 10.16 180) (length 2.54)
+\t\t\t\t\t(name "SW" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "12" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin passive line
+\t\t\t\t\t(at 12.7 5.08 180) (length 2.54)
+\t\t\t\t\t(name "BST" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "11" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin power_out line
+\t\t\t\t\t(at 12.7 0 180) (length 2.54)
+\t\t\t\t\t(name "VOUT" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "9" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin open_collector line
+\t\t\t\t\t(at 12.7 -5.08 180) (length 2.54)
+\t\t\t\t\t(name "PGOOD" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "8" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin power_in line
+\t\t\t\t\t(at 0 -15.24 90) (length 2.54)
+\t\t\t\t\t(name "PGND" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "15" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t\t(pin power_in line
+\t\t\t\t\t(at -5.08 -15.24 90) (length 2.54)
+\t\t\t\t\t(name "AGND" (effects (font (size 1.27 1.27))))
+\t\t\t\t\t(number "7" (effects (font (size 1.27 1.27))))
+\t\t\t\t)
+\t\t\t)
+\t\t\t(embedded_fonts no)
+\t\t)"""
+
+
+def generate_boost_circuit():
+    """Generate all the schematic elements for the TPS61088 boost converter.
+    Returns (junctions, wires, labels, no_connects, texts, symbols) as lists of strings.
+
+    Placed below the main circuit, centered around (80, 140).
+    """
+    junctions = []
+    wires = []
+    labels = []
+    no_connects = []
+    texts = []
+    symbols = []
+
+    pwr_idx = [30]  # start well after existing power refs (existing go up to #PWR23)
+    def next_pwr():
+        pwr_idx[0] += 1
+        return f"#PWR{pwr_idx[0]:02d}"
+
+    # IC center
+    cx, cy = 80.01, 140.97
+
+    # Pin absolute positions
+    VIN  = (cx - 12.7, cy - 10.16)
+    EN   = (cx - 12.7, cy - 5.08)
+    SS   = (cx - 12.7, cy)
+    COMP = (cx - 12.7, cy + 5.08)
+    FB   = (cx - 12.7, cy + 10.16)
+    SW   = (cx + 12.7, cy - 10.16)
+    BST  = (cx + 12.7, cy - 5.08)
+    VOUT = (cx + 12.7, cy)
+    PG   = (cx + 12.7, cy + 5.08)
+    PGND = (cx, cy + 15.24)
+    AGND = (cx - 5.08, cy + 15.24)
+
+    # Place TPS61088 IC
+    ic_pins = {str(i): uid() for i in [1, 3, 4, 5, 6, 7, 8, 9, 11, 12, 15]}
+    symbols.append(gen_symbol("TPS61088:TPS61088", "U1", "TPS61088", cx, cy, pins=ic_pins))
+
+    # ── INPUT SECTION ──
+    vin_rail_y = VIN[1]
+    pwr5v_x = 39.37
+    c1_x = 44.45
+    c2_x = 52.07
+    en_tap_x = 59.69
+
+    # +5V source
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:+5V", "+5V", pwr5v_x, vin_rail_y - 5.08, ref))
+    wires.append(gen_wire(pwr5v_x, vin_rail_y - 5.08, pwr5v_x, vin_rail_y))
+
+    # VIN rail (segmented)
+    wires.append(gen_wire(pwr5v_x, vin_rail_y, c1_x, vin_rail_y))
+    wires.append(gen_wire(c1_x, vin_rail_y, c2_x, vin_rail_y))
+    wires.append(gen_wire(c2_x, vin_rail_y, en_tap_x, vin_rail_y))
+    wires.append(gen_wire(en_tap_x, vin_rail_y, VIN[0], vin_rail_y))
+
+    # C1 input cap (22µF) — using Device:C (pins at ±3.81)
+    c1_cy = vin_rail_y + 6.35
+    symbols.append(gen_symbol("Device:C", "C4", "22uF", c1_x, c1_cy,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(c1_x, c1_cy - 3.81, c1_x, vin_rail_y))
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", c1_x, c1_cy + 6.35, ref))
+    wires.append(gen_wire(c1_x, c1_cy + 3.81, c1_x, c1_cy + 6.35))
+
+    # C2 input cap (22µF)
+    c2_cy = vin_rail_y + 6.35
+    symbols.append(gen_symbol("Device:C", "C5", "22uF", c2_x, c2_cy,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(c2_x, c2_cy - 3.81, c2_x, vin_rail_y))
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", c2_x, c2_cy + 6.35, ref))
+    wires.append(gen_wire(c2_x, c2_cy + 3.81, c2_x, c2_cy + 6.35))
+
+    # EN tied to VIN
+    wires.append(gen_wire(EN[0], EN[1], en_tap_x, EN[1]))
+    wires.append(gen_wire(en_tap_x, EN[1], en_tap_x, vin_rail_y))
+
+    # ── SOFT-START ──
+    ss_x = 59.69
+    c3_cy = SS[1] + 6.35
+    wires.append(gen_wire(SS[0], SS[1], ss_x, SS[1]))
+    symbols.append(gen_symbol("Device:C", "C6", "22nF", ss_x, c3_cy,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(ss_x, SS[1], ss_x, c3_cy - 3.81))
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", ss_x, c3_cy + 6.35, ref))
+    wires.append(gen_wire(ss_x, c3_cy + 3.81, ss_x, c3_cy + 6.35))
+
+    # ── COMPENSATION ──
+    comp_x = 52.07
+    r1_y = COMP[1] + 6.35
+    wires.append(gen_wire(COMP[0], COMP[1], comp_x, COMP[1]))
+    symbols.append(gen_symbol("Device:R", "R3", "30.1k", comp_x, r1_y,  # COMP resistor
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(comp_x, COMP[1], comp_x, r1_y - 3.81))
+
+    c4_y = r1_y + 10.16
+    symbols.append(gen_symbol("Device:C", "C8", "47pF", comp_x, c4_y,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(comp_x, r1_y + 3.81, comp_x, c4_y - 3.81))
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", comp_x, c4_y + 6.35, ref))
+    wires.append(gen_wire(comp_x, c4_y + 3.81, comp_x, c4_y + 6.35))
+
+    # ── IC GROUND ──
+    gnd_y = PGND[1] + 5.08
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", PGND[0], gnd_y, ref))
+    wires.append(gen_wire(PGND[0], PGND[1], PGND[0], gnd_y))
+    wires.append(gen_wire(AGND[0], AGND[1], AGND[0], gnd_y))
+    wires.append(gen_wire(AGND[0], gnd_y, PGND[0], gnd_y))
+    junctions.append(gen_junction(PGND[0], gnd_y))
+
+    # ── OUTPUT SECTION ──
+    c5_x = 97.79
+    l1_x = 102.87
+    l1_y = SW[1]
+    l1_pin1 = (l1_x - 3.81, l1_y)
+    l1_pin2 = (l1_x + 3.81, l1_y)
+
+    symbols.append(gen_symbol("Device:L", "L1", "2.2uH", l1_x, l1_y, rot=90,
+                              pins={"1": uid(), "2": uid()}))
+
+    # SW → C5 junction → L1
+    wires.append(gen_wire(SW[0], SW[1], c5_x, SW[1]))
+    wires.append(gen_wire(c5_x, SW[1], l1_pin1[0], l1_pin1[1]))
+
+    # Bootstrap cap C5 (100nF)
+    c5_cy = SW[1] + 3.81
+    symbols.append(gen_symbol("Device:C", "C9", "100nF", c5_x, c5_cy,
+                              pins={"1": uid(), "2": uid()}))
+    junctions.append(gen_junction(c5_x, SW[1]))
+    wires.append(gen_wire(c5_x, c5_cy + 3.81, BST[0], BST[1]))
+
+    # VOUT rail
+    vout_rail_x = 115.57
+    wires.append(gen_wire(l1_pin2[0], l1_pin2[1], vout_rail_x, l1_y))
+    wires.append(gen_wire(VOUT[0], VOUT[1], vout_rail_x, VOUT[1]))
+    wires.append(gen_wire(vout_rail_x, l1_y, vout_rail_x, VOUT[1]))
+
+    # Output caps
+    c6_x = 120.65
+    c7_x = 128.27
+
+    wires.append(gen_wire(vout_rail_x, l1_y, c6_x, l1_y))
+    wires.append(gen_wire(c6_x, l1_y, c7_x, l1_y))
+
+    c6_cy = l1_y + 6.35
+    symbols.append(gen_symbol("Device:C", "C10", "22uF", c6_x, c6_cy,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(c6_x, c6_cy - 3.81, c6_x, l1_y))
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", c6_x, c6_cy + 6.35, ref))
+    wires.append(gen_wire(c6_x, c6_cy + 3.81, c6_x, c6_cy + 6.35))
+
+    c7_cy = l1_y + 6.35
+    symbols.append(gen_symbol("Device:C", "C11", "22uF", c7_x, c7_cy,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(c7_x, c7_cy - 3.81, c7_x, l1_y))
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", c7_x, c7_cy + 6.35, ref))
+    wires.append(gen_wire(c7_x, c7_cy + 3.81, c7_x, c7_cy + 6.35))
+
+    # +12V output
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:+12V", "+12V", c7_x, l1_y - 5.08, ref))
+    wires.append(gen_wire(c7_x, l1_y, c7_x, l1_y - 5.08))
+    junctions.append(gen_junction(c7_x, l1_y))
+
+    # ── FEEDBACK DIVIDER ──
+    fb_x = vout_rail_x
+    r2_y = VOUT[1] + 6.35
+    symbols.append(gen_symbol("Device:R", "R4", "190k", fb_x, r2_y,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(fb_x, VOUT[1], fb_x, r2_y - 3.81))
+    junctions.append(gen_junction(fb_x, VOUT[1]))
+
+    r3_y = r2_y + 10.16
+    symbols.append(gen_symbol("Device:R", "R5", "10k", fb_x, r3_y,
+                              pins={"1": uid(), "2": uid()}))
+    wires.append(gen_wire(fb_x, r2_y + 3.81, fb_x, r3_y - 3.81))
+
+    # FB tap label
+    fb_tap_y = r2_y + 3.81
+    wires.append(gen_wire(fb_x, fb_tap_y, fb_x + 5.08, fb_tap_y))
+    labels.append(gen_label(fb_x + 5.08, fb_tap_y, "FB"))
+    junctions.append(gen_junction(fb_x, fb_tap_y))
+
+    # FB label at IC
+    wires.append(gen_wire(FB[0], FB[1], FB[0] - 5.08, FB[1]))
+    labels.append(gen_label(FB[0] - 5.08, FB[1], "FB", rot=180))
+
+    # R3 to GND
+    ref = next_pwr()
+    symbols.append(gen_pwr("power:GND", "GND", fb_x, r3_y + 6.35, ref))
+    wires.append(gen_wire(fb_x, r3_y + 3.81, fb_x, r3_y + 6.35))
+
+    # PGOOD no connect
+    no_connects.append(gen_no_connect(PG[0], PG[1]))
+
+    # ── NOTES ──
+    nx = 39.37
+    ny = 177.8
+    texts.append(gen_text(nx, ny, "TPS61088 Boost: 5V to 12V @ 2A"))
+    texts.append(gen_text(nx, ny + 3.81, "VOUT = 0.6V x (1 + 190k/10k) = 12.06V"))
+
+    return junctions, wires, labels, no_connects, texts, symbols
+
+
+def main():
+    infile = "firstpcb.kicad_sch"
+    outfile = "firstpcb.kicad_sch"
+
+    print(f"Reading {infile}...")
+    with open(infile, "r") as f:
+        text = f.read()
+
+    # Step 1: Remove L7805 lib_symbol
+    print("\nRemoving L7805 lib_symbol...")
+    text = remove_lib_symbol(text, REMOVE_LIB_SYMBOL)
+
+    # Step 2: Remove wires first (they reference removed components)
+    print("\nRemoving L7805 circuit wires...")
+    text = remove_blocks_by_uuid(text, REMOVE_WIRE_UUIDS)
+
+    # Step 3: Remove components and power symbols
+    print("\nRemoving L7805 circuit components...")
+    text = remove_blocks_by_uuid(text, REMOVE_UUIDS)
+
+    # Step 4: Add TPS61088 lib_symbol to lib_symbols section
+    print("\nAdding TPS61088 lib_symbol...")
+    # Find end of lib_symbols section (look for the closing paren before first junction/wire/label/symbol)
+    # The lib_symbols section ends with a line like "\t)"
+    # Find the pattern: a tab + ) that comes after all symbol definitions
+    lib_end_marker = "\n\t)\n"
+    # Find the FIRST occurrence of this pattern after "(lib_symbols"
+    lib_start = text.find("(lib_symbols")
+    if lib_start == -1:
+        print("ERROR: Could not find lib_symbols section", file=sys.stderr)
+        sys.exit(1)
+
+    # Find the end of lib_symbols by tracking paren depth
+    lib_paren = text.index("(", lib_start)
+    lib_end = find_block_end(text, lib_paren)
+    # Insert before the closing paren
+    insert_pos = lib_end
+    # Read Device:L lib_symbol from KiCad library (not embedded in this schematic)
+    device_l_sym = ""
+    kicad_sym_paths = [
+        "/nix/store/pbwczj1nsp823njj1kkw75a99jmkz958-kicad-symbols-884133df0a/share/kicad/symbols/Device.kicad_sym",
+        "/nix/store/6yiq36yhskjhga4mw63ypbw2wcb4f4m9-kicad-symbols-884133df0a/share/kicad/symbols/Device.kicad_sym",
+    ]
+    for path in kicad_sym_paths:
+        try:
+            with open(path) as lf:
+                ltext = lf.read()
+            ls = ltext.find('\n\t(symbol "L"')
+            if ls != -1:
+                ls += 1
+                li = ls
+                while ltext[li] != '(':
+                    li += 1
+                ldepth = 0
+                lpos = li
+                while lpos < len(ltext):
+                    if ltext[lpos] == '(':
+                        ldepth += 1
+                    elif ltext[lpos] == ')':
+                        ldepth -= 1
+                        if ldepth == 0:
+                            device_l_sym = ltext[ls:lpos+1]
+                            device_l_sym = device_l_sym.replace('(symbol "L"', '(symbol "Device:L"', 1)
+                            # Add extra tab for nesting inside lib_symbols
+                            device_l_sym = '\n'.join('\t' + line for line in device_l_sym.split('\n'))
+                            print(f"  Loaded Device:L from {path}")
+                            break
+                    lpos += 1
+            if device_l_sym:
+                break
+        except FileNotFoundError:
+            continue
+
+    text = text[:insert_pos] + "\n" + TPS61088_LIB_SYMBOL + "\n" + device_l_sym + "\n\t" + text[insert_pos:]
+
+    # Step 5: Generate and insert boost converter circuit
+    print("\nGenerating TPS61088 boost converter circuit...")
+    juncs, wires, lbls, ncs, txts, syms = generate_boost_circuit()
+
+    # Insert before (sheet_instances
+    sheet_marker = "\t(sheet_instances"
+    sheet_pos = text.find(sheet_marker)
+    if sheet_pos == -1:
+        print("ERROR: Could not find sheet_instances", file=sys.stderr)
+        sys.exit(1)
+
+    insert_blocks = []
+    insert_blocks.extend(juncs)
+    insert_blocks.extend(ncs)
+    insert_blocks.extend(wires)
+    insert_blocks.extend(lbls)
+    insert_blocks.extend(txts)
+    insert_blocks.extend(syms)
+
+    insert_text = "\n".join(insert_blocks) + "\n"
+    text = text[:sheet_pos] + insert_text + text[sheet_pos:]
+
+    # Step 6: Write output
+    print(f"\nWriting {outfile}...")
+    with open(outfile, "w") as f:
+        f.write(text)
+
+    print("Done! Open in KiCad to review.")
+
+
+if __name__ == "__main__":
+    main()

pcbway_export/README.txt

@@ -0,0 +1,39 @@
+firstpcb — PCBWay fabrication package
+======================================
+
+Board specifications
+--------------------
+Size:               81.0 mm x 60.0 mm (rectangular)
+Layers:             2 (F.Cu, B.Cu)
+Thickness:          1.6 mm (default; confirm in checkout)
+Min trace/space:    0.20 mm
+Min hole:           0.30 mm (PTH); 2.20 mm NPTH for M2 mounting holes
+Finish:             HASL (default; ENIG OK)
+Solder mask:        Green (default; any color)
+Silkscreen:         White
+Units:              mm, absolute origin
+
+File manifest
+-------------
+firstpcb-F_Cu.gtl            Top copper
+firstpcb-B_Cu.gbl            Bottom copper
+firstpcb-F_Mask.gts          Top solder mask
+firstpcb-B_Mask.gbs          Bottom solder mask
+firstpcb-F_Silkscreen.gto    Top silkscreen
+firstpcb-B_Silkscreen.gbo    Bottom silkscreen
+firstpcb-F_Paste.gtp         Top paste (for stencil; optional)
+firstpcb-B_Paste.gbp         Bottom paste (no SMD on bottom; effectively empty)
+firstpcb-Edge_Cuts.gm1       Board outline
+firstpcb-PTH.drl             Plated through holes (78 hits)
+firstpcb-NPTH.drl            Non-plated holes (4 hits, 2.20 mm M2 mounting)
+firstpcb-PTH-drl_map.pdf     PTH drill map (reference only)
+firstpcb-NPTH-drl_map.pdf    NPTH drill map (reference only)
+firstpcb-job.gbrjob          KiCad gerber job file (reference)
+
+Notes
+-----
+- Gerber format: RS-274X (Protel extensions), 4.6 precision, mm.
+- Drill format: Excellon, absolute coords, mm, decimal zeros, separate PTH/NPTH.
+- DRC: passes with 0 errors. Only "library hygiene" warnings remain
+  (inline footprint copies of U2 and the 4 mounting holes differ from
+  their source libraries — no manufacturing impact).

pcbway_export/firstpcb-B_Mask.gbs

@@ -0,0 +1,129 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,10.0.0*
+G04 #@! TF.CreationDate,2026-05-15T16:38:12-04:00*
+G04 #@! TF.ProjectId,firstpcb,66697273-7470-4636-922e-6b696361645f,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Soldermask,Bot*
+G04 #@! TF.FilePolarity,Negative*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 10.0.0) date 2026-05-15 16:38:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%ADD10R,1.600000X1.600000*%
+%ADD11O,1.600000X1.600000*%
+%ADD12RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*%
+%ADD13O,1.700000X1.950000*%
+%ADD14C,1.500000*%
+%ADD15R,1.500000X1.500000*%
+%ADD16C,0.600000*%
+%ADD17RoundRect,0.250000X0.600000X0.725000X-0.600000X0.725000X-0.600000X-0.725000X0.600000X-0.725000X0*%
+G04 APERTURE END LIST*
+D10*
+G04 #@! TO.C,A4988*
+X111340000Y-68890000D03*
+D11*
+X111340000Y-66350000D03*
+X111340000Y-63810000D03*
+X111340000Y-61270000D03*
+X111340000Y-58730000D03*
+X111340000Y-56190000D03*
+X111340000Y-53650000D03*
+X111340000Y-51110000D03*
+X98640000Y-51110000D03*
+X98640000Y-53650000D03*
+X98640000Y-56190000D03*
+X98640000Y-58730000D03*
+X98640000Y-61270000D03*
+X98640000Y-63810000D03*
+X98640000Y-66350000D03*
+X98640000Y-68890000D03*
+G04 #@! TD*
+D12*
+G04 #@! TO.C,MotorPower1*
+X124000000Y-44300000D03*
+D13*
+X126500000Y-44300000D03*
+X129000000Y-44300000D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,ESP32-WROOM1*
+X65000000Y-90560000D03*
+X65000000Y-88020000D03*
+X65000000Y-85480000D03*
+X65000000Y-82940000D03*
+X65000000Y-80400000D03*
+X65000000Y-77860000D03*
+X65000000Y-75320000D03*
+X65000000Y-72780000D03*
+X65000000Y-70240000D03*
+X65000000Y-67700000D03*
+X65000000Y-65160000D03*
+X65000000Y-62620000D03*
+X65000000Y-60080000D03*
+X65000000Y-57540000D03*
+D15*
+X65000000Y-55000000D03*
+D14*
+X90400000Y-90560000D03*
+X90400000Y-88020000D03*
+X90400000Y-85480000D03*
+X90400000Y-82940000D03*
+X90400000Y-80400000D03*
+X90400000Y-77860000D03*
+X90400000Y-75320000D03*
+X90400000Y-72780000D03*
+X90400000Y-70240000D03*
+X90400000Y-67700000D03*
+X90400000Y-65160000D03*
+X90400000Y-62620000D03*
+X90400000Y-60080000D03*
+X90400000Y-57540000D03*
+X90400000Y-55000000D03*
+G04 #@! TD*
+D16*
+G04 #@! TO.C,U2*
+X117450000Y-76950000D03*
+X117450000Y-78000000D03*
+X118225000Y-76199999D03*
+X118225000Y-76950000D03*
+X118225000Y-78000000D03*
+X118225000Y-78750001D03*
+X119000000Y-76950000D03*
+X119000000Y-78000000D03*
+G04 #@! TD*
+D17*
+G04 #@! TO.C,SW1*
+X116000000Y-45000000D03*
+D13*
+X113500000Y-45000000D03*
+X111000000Y-45000000D03*
+G04 #@! TD*
+D12*
+G04 #@! TO.C,StepperConnection1*
+X96000000Y-45000000D03*
+D13*
+X98500000Y-45000000D03*
+X101000000Y-45000000D03*
+X103500000Y-45000000D03*
+G04 #@! TD*
+M02*

pcbway_export/firstpcb-B_Paste.gbp

@@ -0,0 +1,15 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,10.0.0*
+G04 #@! TF.CreationDate,2026-05-15T16:38:12-04:00*
+G04 #@! TF.ProjectId,firstpcb,66697273-7470-4636-922e-6b696361645f,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Paste,Bot*
+G04 #@! TF.FilePolarity,Positive*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 10.0.0) date 2026-05-15 16:38:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 APERTURE END LIST*
+M02*

pcbway_export/firstpcb-B_Silkscreen.gbo

@@ -0,0 +1,131 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,10.0.0*
+G04 #@! TF.CreationDate,2026-05-15T16:38:12-04:00*
+G04 #@! TF.ProjectId,firstpcb,66697273-7470-4636-922e-6b696361645f,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Legend,Bot*
+G04 #@! TF.FilePolarity,Positive*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 10.0.0) date 2026-05-15 16:38:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%ADD10R,1.600000X1.600000*%
+%ADD11O,1.600000X1.600000*%
+%ADD12RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*%
+%ADD13O,1.700000X1.950000*%
+%ADD14C,1.500000*%
+%ADD15R,1.500000X1.500000*%
+%ADD16C,0.600000*%
+%ADD17RoundRect,0.250000X0.600000X0.725000X-0.600000X0.725000X-0.600000X-0.725000X0.600000X-0.725000X0*%
+G04 APERTURE END LIST*
+%LPC*%
+D10*
+G04 #@! TO.C,A4988*
+X111340000Y-68890000D03*
+D11*
+X111340000Y-66350000D03*
+X111340000Y-63810000D03*
+X111340000Y-61270000D03*
+X111340000Y-58730000D03*
+X111340000Y-56190000D03*
+X111340000Y-53650000D03*
+X111340000Y-51110000D03*
+X98640000Y-51110000D03*
+X98640000Y-53650000D03*
+X98640000Y-56190000D03*
+X98640000Y-58730000D03*
+X98640000Y-61270000D03*
+X98640000Y-63810000D03*
+X98640000Y-66350000D03*
+X98640000Y-68890000D03*
+G04 #@! TD*
+D12*
+G04 #@! TO.C,MotorPower1*
+X124000000Y-44300000D03*
+D13*
+X126500000Y-44300000D03*
+X129000000Y-44300000D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,ESP32-WROOM1*
+X65000000Y-90560000D03*
+X65000000Y-88020000D03*
+X65000000Y-85480000D03*
+X65000000Y-82940000D03*
+X65000000Y-80400000D03*
+X65000000Y-77860000D03*
+X65000000Y-75320000D03*
+X65000000Y-72780000D03*
+X65000000Y-70240000D03*
+X65000000Y-67700000D03*
+X65000000Y-65160000D03*
+X65000000Y-62620000D03*
+X65000000Y-60080000D03*
+X65000000Y-57540000D03*
+D15*
+X65000000Y-55000000D03*
+D14*
+X90400000Y-90560000D03*
+X90400000Y-88020000D03*
+X90400000Y-85480000D03*
+X90400000Y-82940000D03*
+X90400000Y-80400000D03*
+X90400000Y-77860000D03*
+X90400000Y-75320000D03*
+X90400000Y-72780000D03*
+X90400000Y-70240000D03*
+X90400000Y-67700000D03*
+X90400000Y-65160000D03*
+X90400000Y-62620000D03*
+X90400000Y-60080000D03*
+X90400000Y-57540000D03*
+X90400000Y-55000000D03*
+G04 #@! TD*
+D16*
+G04 #@! TO.C,U2*
+X117450000Y-76950000D03*
+X117450000Y-78000000D03*
+X118225000Y-76199999D03*
+X118225000Y-76950000D03*
+X118225000Y-78000000D03*
+X118225000Y-78750001D03*
+X119000000Y-76950000D03*
+X119000000Y-78000000D03*
+G04 #@! TD*
+D17*
+G04 #@! TO.C,SW1*
+X116000000Y-45000000D03*
+D13*
+X113500000Y-45000000D03*
+X111000000Y-45000000D03*
+G04 #@! TD*
+D12*
+G04 #@! TO.C,StepperConnection1*
+X96000000Y-45000000D03*
+D13*
+X98500000Y-45000000D03*
+X101000000Y-45000000D03*
+X103500000Y-45000000D03*
+G04 #@! TD*
+%LPD*%
+M02*

pcbway_export/firstpcb-Edge_Cuts.gm1

@@ -0,0 +1,23 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,10.0.0*
+G04 #@! TF.CreationDate,2026-05-15T16:38:12-04:00*
+G04 #@! TF.ProjectId,firstpcb,66697273-7470-4636-922e-6b696361645f,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Profile,NP*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 10.0.0) date 2026-05-15 16:38:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 #@! TA.AperFunction,Profile*
+%ADD10C,0.050000*%
+G04 #@! TD*
+G04 APERTURE END LIST*
+D10*
+X60000000Y-40000000D02*
+X141000000Y-40000000D01*
+X141000000Y-100000000D01*
+X60000000Y-100000000D01*
+X60000000Y-40000000D01*
+M02*

pcbway_export/firstpcb-F_Mask.gts

@@ -0,0 +1,234 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,10.0.0*
+G04 #@! TF.CreationDate,2026-05-15T16:38:12-04:00*
+G04 #@! TF.ProjectId,firstpcb,66697273-7470-4636-922e-6b696361645f,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Soldermask,Top*
+G04 #@! TF.FilePolarity,Negative*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 10.0.0) date 2026-05-15 16:38:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%ADD10RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
+%ADD11R,1.600000X1.600000*%
+%ADD12O,1.600000X1.600000*%
+%ADD13R,2.900000X5.400000*%
+%ADD14RoundRect,0.250000X0.475000X-0.337500X0.475000X0.337500X-0.475000X0.337500X-0.475000X-0.337500X0*%
+%ADD15RoundRect,0.250000X-0.412500X-0.650000X0.412500X-0.650000X0.412500X0.650000X-0.412500X0.650000X0*%
+%ADD16RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*%
+%ADD17O,1.700000X1.950000*%
+%ADD18RoundRect,0.250000X-0.337500X-0.475000X0.337500X-0.475000X0.337500X0.475000X-0.337500X0.475000X0*%
+%ADD19RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*%
+%ADD20C,1.500000*%
+%ADD21R,1.500000X1.500000*%
+%ADD22R,0.240000X0.599999*%
+%ADD23R,0.599999X0.240000*%
+%ADD24C,0.600000*%
+%ADD25R,2.050001X3.049999*%
+%ADD26RoundRect,0.250000X0.600000X0.725000X-0.600000X0.725000X-0.600000X-0.725000X0.600000X-0.725000X0*%
+G04 APERTURE END LIST*
+D10*
+G04 #@! TO.C,R1*
+X131000000Y-95000000D03*
+X133000000Y-95000000D03*
+G04 #@! TD*
+D11*
+G04 #@! TO.C,A4988*
+X111340000Y-68890000D03*
+D12*
+X111340000Y-66350000D03*
+X111340000Y-63810000D03*
+X111340000Y-61270000D03*
+X111340000Y-58730000D03*
+X111340000Y-56190000D03*
+X111340000Y-53650000D03*
+X111340000Y-51110000D03*
+X98640000Y-51110000D03*
+X98640000Y-53650000D03*
+X98640000Y-56190000D03*
+X98640000Y-58730000D03*
+X98640000Y-61270000D03*
+X98640000Y-63810000D03*
+X98640000Y-66350000D03*
+X98640000Y-68890000D03*
+G04 #@! TD*
+D10*
+G04 #@! TO.C,R7*
+X131000000Y-87000000D03*
+X133000000Y-87000000D03*
+G04 #@! TD*
+G04 #@! TO.C,R6*
+X124000000Y-74000000D03*
+X126000000Y-74000000D03*
+G04 #@! TD*
+G04 #@! TO.C,R8*
+X131000000Y-91000000D03*
+X133000000Y-91000000D03*
+G04 #@! TD*
+D13*
+G04 #@! TO.C,L2*
+X125150000Y-59000000D03*
+X134850000Y-59000000D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,C14*
+X130000000Y-73037500D03*
+X130000000Y-70962500D03*
+G04 #@! TD*
+D15*
+G04 #@! TO.C,C13*
+X123437500Y-87000000D03*
+X126562500Y-87000000D03*
+G04 #@! TD*
+D16*
+G04 #@! TO.C,MotorPower1*
+X124000000Y-44300000D03*
+D17*
+X126500000Y-44300000D03*
+X129000000Y-44300000D03*
+G04 #@! TD*
+D18*
+G04 #@! TO.C,C16*
+X118962500Y-64000000D03*
+X121037500Y-64000000D03*
+G04 #@! TD*
+D15*
+G04 #@! TO.C,C17*
+X123437500Y-91000000D03*
+X126562500Y-91000000D03*
+G04 #@! TD*
+D19*
+G04 #@! TO.C,C3*
+X98300000Y-94000000D03*
+X103700000Y-94000000D03*
+G04 #@! TD*
+D20*
+G04 #@! TO.C,ESP32-WROOM1*
+X65000000Y-90560000D03*
+X65000000Y-88020000D03*
+X65000000Y-85480000D03*
+X65000000Y-82940000D03*
+X65000000Y-80400000D03*
+X65000000Y-77860000D03*
+X65000000Y-75320000D03*
+X65000000Y-72780000D03*
+X65000000Y-70240000D03*
+X65000000Y-67700000D03*
+X65000000Y-65160000D03*
+X65000000Y-62620000D03*
+X65000000Y-60080000D03*
+X65000000Y-57540000D03*
+D21*
+X65000000Y-55000000D03*
+D20*
+X90400000Y-90560000D03*
+X90400000Y-88020000D03*
+X90400000Y-85480000D03*
+X90400000Y-82940000D03*
+X90400000Y-80400000D03*
+X90400000Y-77860000D03*
+X90400000Y-75320000D03*
+X90400000Y-72780000D03*
+X90400000Y-70240000D03*
+X90400000Y-67700000D03*
+X90400000Y-65160000D03*
+X90400000Y-62620000D03*
+X90400000Y-60080000D03*
+X90400000Y-57540000D03*
+X90400000Y-55000000D03*
+G04 #@! TD*
+D18*
+G04 #@! TO.C,C15*
+X123962500Y-77000000D03*
+X126037500Y-77000000D03*
+G04 #@! TD*
+D15*
+G04 #@! TO.C,C12*
+X123437500Y-83000000D03*
+X126562500Y-83000000D03*
+G04 #@! TD*
+D22*
+G04 #@! TO.C,U2*
+X117475080Y-75324999D03*
+D23*
+X116575001Y-75725080D03*
+X116575001Y-76225079D03*
+X116575001Y-76725080D03*
+X116575001Y-77225079D03*
+X116575001Y-77725078D03*
+X116575001Y-78225080D03*
+X116575001Y-78725079D03*
+X116575001Y-79225080D03*
+D22*
+X117475080Y-79625001D03*
+X118975082Y-79625001D03*
+D23*
+X119874999Y-79225080D03*
+X119874999Y-78725079D03*
+X119874999Y-78225080D03*
+X119874999Y-77725078D03*
+X119874999Y-77225079D03*
+X119874999Y-76725080D03*
+X119874999Y-76225079D03*
+X119874999Y-75725080D03*
+D22*
+X118975082Y-75324999D03*
+D24*
+X117450000Y-76950000D03*
+X117450000Y-78000000D03*
+X118225000Y-76199999D03*
+X118225000Y-76950000D03*
+X118225000Y-78000000D03*
+X118225000Y-78750001D03*
+D25*
+X118225081Y-77475079D03*
+D24*
+X119000000Y-76950000D03*
+X119000000Y-78000000D03*
+G04 #@! TD*
+D26*
+G04 #@! TO.C,SW1*
+X116000000Y-45000000D03*
+D17*
+X113500000Y-45000000D03*
+X111000000Y-45000000D03*
+G04 #@! TD*
+D15*
+G04 #@! TO.C,C18*
+X123437500Y-95000000D03*
+X126562500Y-95000000D03*
+G04 #@! TD*
+D10*
+G04 #@! TO.C,R2*
+X96000000Y-80000000D03*
+X98000000Y-80000000D03*
+G04 #@! TD*
+D16*
+G04 #@! TO.C,StepperConnection1*
+X96000000Y-45000000D03*
+D17*
+X98500000Y-45000000D03*
+X101000000Y-45000000D03*
+X103500000Y-45000000D03*
+G04 #@! TD*
+M02*

pcbway_export/firstpcb-F_Paste.gtp

@@ -0,0 +1,415 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,10.0.0*
+G04 #@! TF.CreationDate,2026-05-15T16:38:12-04:00*
+G04 #@! TF.ProjectId,firstpcb,66697273-7470-4636-922e-6b696361645f,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Paste,Top*
+G04 #@! TF.FilePolarity,Positive*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 10.0.0) date 2026-05-15 16:38:12*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%ADD10C,0.000000*%
+%ADD11RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
+%ADD12R,2.900000X5.400000*%
+%ADD13RoundRect,0.250000X0.475000X-0.337500X0.475000X0.337500X-0.475000X0.337500X-0.475000X-0.337500X0*%
+%ADD14RoundRect,0.250000X-0.412500X-0.650000X0.412500X-0.650000X0.412500X0.650000X-0.412500X0.650000X0*%
+%ADD15RoundRect,0.250000X-0.337500X-0.475000X0.337500X-0.475000X0.337500X0.475000X-0.337500X0.475000X0*%
+%ADD16RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*%
+%ADD17R,0.240000X0.599999*%
+%ADD18R,0.599999X0.240000*%
+G04 APERTURE END LIST*
+D10*
+G04 #@! TO.C,U2*
+G36*
+X118050083Y-75074921D02*
+G01*
+X118050083Y-75549921D01*
+X118400082Y-75549921D01*
+X118400082Y-75074921D01*
+X118450082Y-75024921D01*
+X118550082Y-75024921D01*
+X118600082Y-75074921D01*
+X118600082Y-75749921D01*
+X118550082Y-75799921D01*
+X117900083Y-75799921D01*
+X117850083Y-75749921D01*
+X117850083Y-75074921D01*
+X117900083Y-75024921D01*
+X118000083Y-75024921D01*
+X118050083Y-75074921D01*
+G37*
+G36*
+X118600082Y-79200079D02*
+G01*
+X118600082Y-79875079D01*
+X118550082Y-79925079D01*
+X118450082Y-79925079D01*
+X118400082Y-79875079D01*
+X118400082Y-79400079D01*
+X118050083Y-79400079D01*
+X118050083Y-79875079D01*
+X118000083Y-79925079D01*
+X117900083Y-79925079D01*
+X117850083Y-79875079D01*
+X117850083Y-79200079D01*
+X117900083Y-79150079D01*
+X118550082Y-79150079D01*
+X118600082Y-79200079D01*
+G37*
+G36*
+X118083951Y-76000980D02*
+G01*
+X118093519Y-76003880D01*
+X118102336Y-76008594D01*
+X118110065Y-76014937D01*
+X118116407Y-76022666D01*
+X118121119Y-76031482D01*
+X118124022Y-76041051D01*
+X118125003Y-76051000D01*
+X118125003Y-76798999D01*
+X118124022Y-76808948D01*
+X118121119Y-76818517D01*
+X118116407Y-76827333D01*
+X118110065Y-76835062D01*
+X118102336Y-76841405D01*
+X118093519Y-76846119D01*
+X118083951Y-76849020D01*
+X118074002Y-76850000D01*
+X117256000Y-76850000D01*
+X117246051Y-76849020D01*
+X117236483Y-76846119D01*
+X117227666Y-76841405D01*
+X117219937Y-76835062D01*
+X117213595Y-76827333D01*
+X117208883Y-76818517D01*
+X117205980Y-76808948D01*
+X117205002Y-76798999D01*
+X117205002Y-76051000D01*
+X117205980Y-76041051D01*
+X117208883Y-76031482D01*
+X117213595Y-76022666D01*
+X117219937Y-76014937D01*
+X117227666Y-76008594D01*
+X117236483Y-76003880D01*
+X117246051Y-76000980D01*
+X117256000Y-75999999D01*
+X118074002Y-75999999D01*
+X118083951Y-76000980D01*
+G37*
+G36*
+X118083951Y-77050980D02*
+G01*
+X118093519Y-77053881D01*
+X118102336Y-77058595D01*
+X118110065Y-77064937D01*
+X118116407Y-77072667D01*
+X118121119Y-77081483D01*
+X118124022Y-77091051D01*
+X118125003Y-77101000D01*
+X118125003Y-77849000D01*
+X118124022Y-77858949D01*
+X118121119Y-77868517D01*
+X118116407Y-77877333D01*
+X118110065Y-77885063D01*
+X118102336Y-77891405D01*
+X118093519Y-77896119D01*
+X118083951Y-77899020D01*
+X118074002Y-77900000D01*
+X117256000Y-77900000D01*
+X117246051Y-77899020D01*
+X117236483Y-77896119D01*
+X117227666Y-77891405D01*
+X117219937Y-77885063D01*
+X117213595Y-77877333D01*
+X117208883Y-77868517D01*
+X117205980Y-77858949D01*
+X117205002Y-77849000D01*
+X117205002Y-77101000D01*
+X117205980Y-77091051D01*
+X117208883Y-77081483D01*
+X117213595Y-77072667D01*
+X117219937Y-77064937D01*
+X117227666Y-77058595D01*
+X117236483Y-77053881D01*
+X117246051Y-77050980D01*
+X117256000Y-77050000D01*
+X118074002Y-77050000D01*
+X118083951Y-77050980D01*
+G37*
+G36*
+X118083951Y-78100980D02*
+G01*
+X118093519Y-78103881D01*
+X118102336Y-78108595D01*
+X118110065Y-78114938D01*
+X118116407Y-78122667D01*
+X118121119Y-78131483D01*
+X118124022Y-78141052D01*
+X118125003Y-78151001D01*
+X118125003Y-78899000D01*
+X118124022Y-78908949D01*
+X118121119Y-78918518D01*
+X118116407Y-78927334D01*
+X118110065Y-78935063D01*
+X118102336Y-78941406D01*
+X118093519Y-78946120D01*
+X118083951Y-78949020D01*
+X118074002Y-78950001D01*
+X117256000Y-78950001D01*
+X117246051Y-78949020D01*
+X117236483Y-78946120D01*
+X117227666Y-78941406D01*
+X117219937Y-78935063D01*
+X117213595Y-78927334D01*
+X117208883Y-78918518D01*
+X117205980Y-78908949D01*
+X117205002Y-78899000D01*
+X117205002Y-78151001D01*
+X117205980Y-78141052D01*
+X117208883Y-78131483D01*
+X117213595Y-78122667D01*
+X117219937Y-78114938D01*
+X117227666Y-78108595D01*
+X117236483Y-78103881D01*
+X117246051Y-78100980D01*
+X117256000Y-78100000D01*
+X118074002Y-78100000D01*
+X118083951Y-78100980D01*
+G37*
+G36*
+X119203949Y-76000980D02*
+G01*
+X119213517Y-76003880D01*
+X119222334Y-76008594D01*
+X119230063Y-76014937D01*
+X119236405Y-76022666D01*
+X119241117Y-76031482D01*
+X119244020Y-76041051D01*
+X119244998Y-76051000D01*
+X119244998Y-76798999D01*
+X119244020Y-76808948D01*
+X119241117Y-76818517D01*
+X119236405Y-76827333D01*
+X119230063Y-76835062D01*
+X119222334Y-76841405D01*
+X119213517Y-76846119D01*
+X119203949Y-76849020D01*
+X119194000Y-76850000D01*
+X118375998Y-76850000D01*
+X118366049Y-76849020D01*
+X118356481Y-76846119D01*
+X118347664Y-76841405D01*
+X118339935Y-76835062D01*
+X118333593Y-76827333D01*
+X118328881Y-76818517D01*
+X118325978Y-76808948D01*
+X118324997Y-76798999D01*
+X118324997Y-76051000D01*
+X118325978Y-76041051D01*
+X118328881Y-76031482D01*
+X118333593Y-76022666D01*
+X118339935Y-76014937D01*
+X118347664Y-76008594D01*
+X118356481Y-76003880D01*
+X118366049Y-76000980D01*
+X118375998Y-75999999D01*
+X119194000Y-75999999D01*
+X119203949Y-76000980D01*
+G37*
+G36*
+X119203949Y-77050980D02*
+G01*
+X119213517Y-77053881D01*
+X119222334Y-77058595D01*
+X119230063Y-77064937D01*
+X119236405Y-77072667D01*
+X119241117Y-77081483D01*
+X119244020Y-77091051D01*
+X119244998Y-77101000D01*
+X119244998Y-77849000D01*
+X119244020Y-77858949D01*
+X119241117Y-77868517D01*
+X119236405Y-77877333D01*
+X119230063Y-77885063D01*
+X119222334Y-77891405D01*
+X119213517Y-77896119D01*
+X119203949Y-77899020D01*
+X119194000Y-77900000D01*
+X118375998Y-77900000D01*
+X118366049Y-77899020D01*
+X118356481Y-77896119D01*
+X118347664Y-77891405D01*
+X118339935Y-77885063D01*
+X118333593Y-77877333D01*
+X118328881Y-77868517D01*
+X118325978Y-77858949D01*
+X118324997Y-77849000D01*
+X118324997Y-77101000D01*
+X118325978Y-77091051D01*
+X118328881Y-77081483D01*
+X118333593Y-77072667D01*
+X118339935Y-77064937D01*
+X118347664Y-77058595D01*
+X118356481Y-77053881D01*
+X118366049Y-77050980D01*
+X118375998Y-77050000D01*
+X119194000Y-77050000D01*
+X119203949Y-77050980D01*
+G37*
+G36*
+X119203949Y-78100980D02*
+G01*
+X119213517Y-78103881D01*
+X119222334Y-78108595D01*
+X119230063Y-78114938D01*
+X119236405Y-78122667D01*
+X119241117Y-78131483D01*
+X119244020Y-78141052D01*
+X119244998Y-78151001D01*
+X119244998Y-78899000D01*
+X119244020Y-78908949D01*
+X119241117Y-78918518D01*
+X119236405Y-78927334D01*
+X119230063Y-78935063D01*
+X119222334Y-78941406D01*
+X119213517Y-78946120D01*
+X119203949Y-78949020D01*
+X119194000Y-78950001D01*
+X118375998Y-78950001D01*
+X118366049Y-78949020D01*
+X118356481Y-78946120D01*
+X118347664Y-78941406D01*
+X118339935Y-78935063D01*
+X118333593Y-78927334D01*
+X118328881Y-78918518D01*
+X118325978Y-78908949D01*
+X118324997Y-78899000D01*
+X118324997Y-78151001D01*
+X118325978Y-78141052D01*
+X118328881Y-78131483D01*
+X118333593Y-78122667D01*
+X118339935Y-78114938D01*
+X118347664Y-78108595D01*
+X118356481Y-78103881D01*
+X118366049Y-78100980D01*
+X118375998Y-78100000D01*
+X119194000Y-78100000D01*
+X119203949Y-78100980D01*
+G37*
+G04 #@! TD*
+D11*
+G04 #@! TO.C,R1*
+X131000000Y-95000000D03*
+X133000000Y-95000000D03*
+G04 #@! TD*
+G04 #@! TO.C,R7*
+X131000000Y-87000000D03*
+X133000000Y-87000000D03*
+G04 #@! TD*
+G04 #@! TO.C,R6*
+X124000000Y-74000000D03*
+X126000000Y-74000000D03*
+G04 #@! TD*
+G04 #@! TO.C,R8*
+X131000000Y-91000000D03*
+X133000000Y-91000000D03*
+G04 #@! TD*
+D12*
+G04 #@! TO.C,L2*
+X125150000Y-59000000D03*
+X134850000Y-59000000D03*
+G04 #@! TD*
+D13*
+G04 #@! TO.C,C14*
+X130000000Y-73037500D03*
+X130000000Y-70962500D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,C13*
+X123437500Y-87000000D03*
+X126562500Y-87000000D03*
+G04 #@! TD*
+D15*
+G04 #@! TO.C,C16*
+X118962500Y-64000000D03*
+X121037500Y-64000000D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,C17*
+X123437500Y-91000000D03*
+X126562500Y-91000000D03*
+G04 #@! TD*
+D16*
+G04 #@! TO.C,C3*
+X98300000Y-94000000D03*
+X103700000Y-94000000D03*
+G04 #@! TD*
+D15*
+G04 #@! TO.C,C15*
+X123962500Y-77000000D03*
+X126037500Y-77000000D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,C12*
+X123437500Y-83000000D03*
+X126562500Y-83000000D03*
+G04 #@! TD*
+D17*
+G04 #@! TO.C,U2*
+X117475080Y-75324999D03*
+D18*
+X116575001Y-75725080D03*
+X116575001Y-76225079D03*
+X116575001Y-76725080D03*
+X116575001Y-77225079D03*
+X116575001Y-77725078D03*
+X116575001Y-78225080D03*
+X116575001Y-78725079D03*
+X116575001Y-79225080D03*
+D17*
+X117475080Y-79625001D03*
+X118975082Y-79625001D03*
+D18*
+X119874999Y-79225080D03*
+X119874999Y-78725079D03*
+X119874999Y-78225080D03*
+X119874999Y-77725078D03*
+X119874999Y-77225079D03*
+X119874999Y-76725080D03*
+X119874999Y-76225079D03*
+X119874999Y-75725080D03*
+D17*
+X118975082Y-75324999D03*
+G04 #@! TD*
+D14*
+G04 #@! TO.C,C18*
+X123437500Y-95000000D03*
+X126562500Y-95000000D03*
+G04 #@! TD*
+D11*
+G04 #@! TO.C,R2*
+X96000000Y-80000000D03*
+X98000000Y-80000000D03*
+G04 #@! TD*
+M02*

pcbway_export/firstpcb-NPTH.drl

@@ -0,0 +1,19 @@
+M48
+; DRILL file KiCad 10.0.0 date 2026-05-15T16:38:18
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2026-05-15T16:38:18-04:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.0
+; #@! TF.FileFunction,NonPlated,1,2,NPTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T1C2.200
+%
+G90
+G05
+T1
+X63.0Y-43.0
+X63.0Y-97.0
+X138.0Y-43.0
+X138.0Y-97.0
+M30

pcbway_export/firstpcb-PTH.drl

@@ -0,0 +1,105 @@
+M48
+; DRILL file KiCad 10.0.0 date 2026-05-15T16:38:18
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2026-05-15T16:38:18-04:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.0
+; #@! TF.FileFunction,Plated,1,2,PTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,Plated,PTH,ViaDrill
+T1C0.300
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T2C0.300
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T3C0.800
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T4C0.900
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T5C0.950
+%
+G90
+G05
+T1
+X96.0Y-80.0
+X98.0Y-80.0
+X98.3Y-94.0
+X102.0Y-78.6
+X102.6Y-80.2
+X103.8Y-94.0
+X115.0Y-74.0
+X120.0Y-74.2
+X121.0Y-78.0
+X123.438Y-91.0
+X123.438Y-95.0
+X131.0Y-87.0
+X131.0Y-95.0
+X134.85Y-59.0
+T2
+X117.45Y-76.95
+X117.45Y-78.0
+X118.225Y-76.2
+X118.225Y-76.95
+X118.225Y-78.0
+X118.225Y-78.75
+X119.0Y-76.95
+X119.0Y-78.0
+T3
+X98.64Y-51.11
+X98.64Y-53.65
+X98.64Y-56.19
+X98.64Y-58.73
+X98.64Y-61.27
+X98.64Y-63.81
+X98.64Y-66.35
+X98.64Y-68.89
+X111.34Y-51.11
+X111.34Y-53.65
+X111.34Y-56.19
+X111.34Y-58.73
+X111.34Y-61.27
+X111.34Y-63.81
+X111.34Y-66.35
+X111.34Y-68.89
+T4
+X65.0Y-55.0
+X65.0Y-57.54
+X65.0Y-60.08
+X65.0Y-62.62
+X65.0Y-65.16
+X65.0Y-67.7
+X65.0Y-70.24
+X65.0Y-72.78
+X65.0Y-75.32
+X65.0Y-77.86
+X65.0Y-80.4
+X65.0Y-82.94
+X65.0Y-85.48
+X65.0Y-88.02
+X65.0Y-90.56
+X90.4Y-55.0
+X90.4Y-57.54
+X90.4Y-60.08
+X90.4Y-62.62
+X90.4Y-65.16
+X90.4Y-67.7
+X90.4Y-70.24
+X90.4Y-72.78
+X90.4Y-75.32
+X90.4Y-77.86
+X90.4Y-80.4
+X90.4Y-82.94
+X90.4Y-85.48
+X90.4Y-88.02
+X90.4Y-90.56
+T5
+X96.0Y-45.0
+X98.5Y-45.0
+X101.0Y-45.0
+X103.5Y-45.0
+X111.0Y-45.0
+X113.5Y-45.0
+X116.0Y-45.0
+X124.0Y-44.3
+X126.5Y-44.3
+X129.0Y-44.3
+M30

pcbway_export/firstpcb-job.gbrjob

@@ -0,0 +1,127 @@
+{
+  "Header": {
+    "GenerationSoftware": {
+      "Vendor": "KiCad",
+      "Application": "Pcbnew",
+      "Version": "10.0.0"
+    },
+    "CreationDate": "2026-05-15T16:38:12-04:00"
+  },
+  "GeneralSpecs": {
+    "ProjectId": {
+      "Name": "firstpcb",
+      "GUID": "66697273-7470-4636-922e-6b696361645f",
+      "Revision": "rev?"
+    },
+    "Size": {
+      "X": 81.05,
+      "Y": 60.05
+    },
+    "LayerNumber": 2,
+    "BoardThickness": 1.6,
+    "Finish": "None"
+  },
+  "DesignRules": [
+    {
+      "Layers": "Outer",
+      "PadToPad": 0.2,
+      "PadToTrack": 0.2,
+      "TrackToTrack": 0.2,
+      "MinLineWidth": 0.2,
+      "TrackToRegion": 0.2,
+      "RegionToRegion": 0.2
+    }
+  ],
+  "FilesAttributes": [
+    {
+      "Path": "firstpcb-F_Cu.gtl",
+      "FileFunction": "Copper,L1,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "firstpcb-B_Cu.gbl",
+      "FileFunction": "Copper,L2,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "firstpcb-F_Paste.gtp",
+      "FileFunction": "SolderPaste,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "firstpcb-B_Paste.gbp",
+      "FileFunction": "SolderPaste,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "firstpcb-F_Silkscreen.gto",
+      "FileFunction": "Legend,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "firstpcb-B_Silkscreen.gbo",
+      "FileFunction": "Legend,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "firstpcb-F_Mask.gts",
+      "FileFunction": "SolderMask,Top",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "firstpcb-B_Mask.gbs",
+      "FileFunction": "SolderMask,Bot",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "firstpcb-Edge_Cuts.gm1",
+      "FileFunction": "Profile",
+      "FilePolarity": "Positive"
+    }
+  ],
+  "MaterialStackup": [
+    {
+      "Type": "Legend",
+      "Name": "Top Silk Screen"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Top Solder Paste"
+    },
+    {
+      "Type": "SolderMask",
+      "Thickness": 0.01,
+      "Name": "Top Solder Mask"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "F.Cu"
+    },
+    {
+      "Type": "Dielectric",
+      "Thickness": 1.51,
+      "Material": "FR4",
+      "Name": "F.Cu/B.Cu",
+      "Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "B.Cu"
+    },
+    {
+      "Type": "SolderMask",
+      "Thickness": 0.01,
+      "Name": "Bottom Solder Mask"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Bottom Solder Paste"
+    },
+    {
+      "Type": "Legend",
+      "Name": "Bottom Silk Screen"
+    }
+  ]
+}

sym-lib-table

@@ -0,0 +1,225 @@
+(sym_lib_table
+  (lib (name "4xxx_IEEE")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/4xxx_IEEE.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "4xxx")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/4xxx.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "74xGxx")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/74xGxx.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "74xx_IEEE")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/74xx_IEEE.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "74xx")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/74xx.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Audio")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Audio.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Buffer")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Buffer.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Current")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Current.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Difference")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Difference.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Instrumentation")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Instrumentation.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Operational")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Operational.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Amplifier_Video")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Amplifier_Video.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Analog_ADC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Analog_ADC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Analog_DAC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Analog_DAC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Analog")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Analog.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Analog_Switch")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Analog_Switch.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Audio")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Audio.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Auxiliary_Items")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Auxiliary_Items.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Battery_Management")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Battery_Management.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Buffer")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Buffer.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Comparator")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Comparator.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Audio")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Connector_Audio.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Generic")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Connector_Generic.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Generic_MountingPin")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Connector_Generic_MountingPin.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector_Generic_Shielded")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Connector_Generic_Shielded.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Connector")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Connector.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Converter_ACDC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Converter_ACDC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Converter_DCDC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPLD_Altera")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPLD_Altera.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPLD_Microchip")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPLD_Microchip.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPLD_Renesas")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPLD_Renesas.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPLD_Xilinx")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPLD_Xilinx.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPU")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPU.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPU_NXP_68000")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPU_NXP_68000.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPU_NXP_6800")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPU_NXP_6800.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPU_NXP_IMX")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPU_NXP_IMX.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "CPU_PowerPC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/CPU_PowerPC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Device")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Device.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Diode_Bridge")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Diode_Bridge.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Diode")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Diode.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Diode_Laser")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Diode_Laser.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Display_Character")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Display_Character.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Display_Graphic")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Display_Graphic.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Driver_Display")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Driver_Display.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Driver_FET")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Driver_FET.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Driver")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Driver.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Driver_LED")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Driver_LED.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Driver_Motor")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Driver_Motor.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "DSP_AnalogDevices")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/DSP_AnalogDevices.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "DSP_Freescale")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/DSP_Freescale.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "DSP_Microchip_DSPIC33")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/DSP_Microchip_DSPIC33.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "DSP_Motorola")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/DSP_Motorola.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "DSP_Texas")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/DSP_Texas.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Fiber_Optic")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Fiber_Optic.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Filter")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Filter.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Altera_MAX10")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Altera_MAX10.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_CologneChip_GateMate")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_CologneChip_GateMate.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Efinix_Trion")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Efinix_Trion.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Lattice")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Lattice.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Microsemi")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Microsemi.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx_Artix7")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx_Artix7.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx_Kintex7")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx_Kintex7.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx_Spartan6")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx_Spartan6.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx_Virtex5")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx_Virtex5.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx_Virtex6")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx_Virtex6.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "FPGA_Xilinx_Virtex7")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/FPGA_Xilinx_Virtex7.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "GPU")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/GPU.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Graphic")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Graphic.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_CAN_LIN")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_CAN_LIN.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_CurrentLoop")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_CurrentLoop.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_Ethernet")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_Ethernet.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_Expansion")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_Expansion.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_HDMI")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_HDMI.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_HID")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_HID.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_LineDriver")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_LineDriver.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_Optical")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_Optical.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_Telecom")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_Telecom.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_UART")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_UART.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Interface_USB")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Interface_USB.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Isolator_Analog")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Isolator_Analog.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Isolator")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Isolator.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Jumper")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Jumper.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "LED")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/LED.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Logic_LevelTranslator")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Logic_LevelTranslator.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Logic_Programmable")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Logic_Programmable.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_AnalogDevices")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_AnalogDevices.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Cypress")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Cypress.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Dialog")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Dialog.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Espressif")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Espressif.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Intel")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Intel.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_8051")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_8051.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_ATmega")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_ATmega.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_ATtiny")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_ATtiny.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_AVR_Dx")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_AVR_Dx.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_AVR")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_AVR.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_PIC10")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_PIC10.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_PIC12")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_PIC12.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_PIC16")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_PIC16.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_PIC18")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_PIC18.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_PIC24")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_PIC24.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_PIC32")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_PIC32.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_SAMA")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_SAMA.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_SAMD")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_SAMD.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_SAME")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_SAME.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_SAML")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_SAML.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Microchip_SAMV")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Microchip_SAMV.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Module")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Module.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Nordic")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Nordic.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_ColdFire")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_ColdFire.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_HC11")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_HC11.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_HC12")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_HC12.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_HCS12")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_HCS12.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_Kinetis")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_Kinetis.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_LPC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_LPC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_MAC7100")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_MAC7100.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_MCore")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_MCore.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_NTAG")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_NTAG.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_NXP_S08")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_NXP_S08.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Parallax")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Parallax.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Puya")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Puya.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_RaspberryPi")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_RaspberryPi.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Renesas_Synergy_S1")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Renesas_Synergy_S1.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_SiFive")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_SiFive.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_SiliconLabs")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_SiliconLabs.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_STC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_STC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32C0")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32C0.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32F0")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32F0.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32F1")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32F1.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32F2")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32F2.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32F3")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32F3.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32F4")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32F4.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32F7")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32F7.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32G0")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32G0.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32G4")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32G4.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32H5")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32H5.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32H7")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32H7.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32L0")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32L0.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32L1")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32L1.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32L4")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32L4.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32L5")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32L5.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32MP1")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32MP1.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32U0")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32U0.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32U5")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32U5.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32WB")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32WB.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM32WL")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM32WL.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_ST_STM8")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_ST_STM8.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Texas")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Texas.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Texas_MSP430")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Texas_MSP430.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Texas_SimpleLink")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Texas_SimpleLink.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_Trident")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_Trident.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "MCU_WCH_RiscV")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/MCU_WCH_RiscV.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Mechanical")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Mechanical.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_EEPROM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_EEPROM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_EPROM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_EPROM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_Flash")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_Flash.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_NVRAM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_NVRAM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_RAM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_RAM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_ROM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_ROM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Memory_UniqueID")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Memory_UniqueID.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Motor")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Motor.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Oscillator")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Oscillator.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Potentiometer_Digital")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Potentiometer_Digital.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "power")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/power.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Power_Management")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Power_Management.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Power_Protection")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Power_Protection.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Power_Supervisor")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Power_Supervisor.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Reference_Current")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Reference_Current.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Reference_Voltage")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Reference_Voltage.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Regulator_Controller")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Regulator_Controller.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Regulator_Current")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Regulator_Current.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Regulator_Linear")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Regulator_Linear.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Regulator_SwitchedCapacitor")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Regulator_SwitchedCapacitor.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Regulator_Switching")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Regulator_Switching.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Relay")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Relay.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Relay_SolidState")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Relay_SolidState.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_AM_FM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_AM_FM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Amplifier")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_Amplifier.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Bluetooth")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_Bluetooth.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Filter")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_Filter.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_GPS")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_GPS.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_GSM")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_GSM.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Mixer")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_Mixer.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Module")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_Module.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_NFC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_NFC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_RFID")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_RFID.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_Switch")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_Switch.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_WiFi")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_WiFi.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "RF_ZigBee")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/RF_ZigBee.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Security")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Security.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Audio")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Audio.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Current")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Current.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Distance")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Distance.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Energy")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Energy.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Gas")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Gas.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Humidity")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Humidity.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Magnetic")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Magnetic.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Motion")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Motion.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Optical")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Optical.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Pressure")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Pressure.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Proximity")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Proximity.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Temperature")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Temperature.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Touch")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Touch.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Sensor_Voltage")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Sensor_Voltage.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Simulation_SPICE")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Simulation_SPICE.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Switch")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Switch.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Timer")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Timer.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Timer_PLL")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Timer_PLL.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Timer_RTC")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Timer_RTC.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transformer")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transformer.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_Array")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transistor_Array.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_BJT")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transistor_BJT.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_FET")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transistor_FET.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_FET_Other")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transistor_FET_Other.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_IGBT")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transistor_IGBT.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Transistor_Power_Module")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Transistor_Power_Module.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Triac_Thyristor")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Triac_Thyristor.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Valve")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Valve.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "Video")(type "KiCad")(uri "${KICAD10_SYMBOL_DIR}/Video.kicad_sym")(options "")(descr "Standard KiCad library"))
+  (lib (name "2026-04-22_02-02-55")(type "KiCad")(uri "${KICAD_PROJECT_SYMBOL_DIR}/2026-04-22_02-02-55.kicad_sym")(options "")(descr "Project library"))
+)

test_bin-erc.rpt

@@ -0,0 +1,182 @@
+ERC report (2026-04-20T17:42:47-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(39.37 mm, 125.73 mm): Symbol #PWR31 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(44.45 mm, 133.35 mm): Symbol C4 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 133.35 mm): Symbol C5 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 130.81 mm): Symbol U1 Pin 1 [VIN, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(67.31 mm, 130.81 mm): Symbol U1 Pin 1 [VIN, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(44.45 mm, 140.97 mm): Symbol C4 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(44.45 mm, 143.51 mm): Symbol #PWR32 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 140.97 mm): Symbol C5 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 135.89 mm): Symbol U1 Pin 3 [EN, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 135.89 mm): Symbol U1 Pin 3 [EN, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 143.51 mm): Symbol #PWR33 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(59.69 mm, 143.51 mm): Symbol C6 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 140.97 mm): Symbol U1 Pin 4 [SS/TR, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 148.59 mm): Symbol R3 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 130.81 mm): Symbol U1 Pin 12 [SW, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 146.05 mm): Symbol U1 Pin 5 [COMP, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(59.69 mm, 151.13 mm): Symbol C6 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 135.89 mm): Symbol U1 Pin 11 [BST, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 156.21 mm): Symbol R3 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(59.69 mm, 153.67 mm): Symbol #PWR34 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 158.75 mm): Symbol C8 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 140.97 mm): Symbol U1 Pin 9 [VOUT, Power output, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 146.05 mm): Symbol U1 Pin 8 [PGOOD, Open collector, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(74.93 mm, 156.21 mm): Symbol U1 Pin 7 [AGND, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(74.93 mm, 156.21 mm): Symbol U1 Pin 7 [AGND, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 166.37 mm): Symbol C8 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(80.01 mm, 156.21 mm): Symbol U1 Pin 15 [PGND, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(80.01 mm, 156.21 mm): Symbol U1 Pin 15 [PGND, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 168.91 mm): Symbol #PWR35 Pin 1 [Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'TPS61088'
+    ; warning
+    @(80.01 mm, 140.97 mm): Symbol U1 [TPS61088]
+
+ ** ERC messages: 59  Errors 54  Warnings 5

test_cum-erc.rpt

@@ -0,0 +1,263 @@
+ERC report (2026-04-20T17:41:33-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(39.37 mm, 125.73 mm): Vertical Wire, length 5.08 mm
+    @(39.37 mm, 130.81 mm): Horizontal Wire, length 5.08 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(44.45 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(52.07 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(67.31 mm, 140.97 mm): Horizontal Wire, length 7.62 mm
+    @(59.69 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(92.71 mm, 130.81 mm): Horizontal Wire, length 5.08 mm
+    @(97.79 mm, 130.81 mm): Horizontal Wire, length 1.27 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(67.31 mm, 146.05 mm): Horizontal Wire, length 15.24 mm
+    @(52.07 mm, 146.05 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(59.69 mm, 151.13 mm): Vertical Wire, length 2.54 mm
+[label_dangling]: Label not connected to anything
+    ; error
+    @(62.23 mm, 151.13 mm): Label 'FB'
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(52.07 mm, 156.21 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(106.68 mm, 130.81 mm): Horizontal Wire, length 8.89 mm
+    @(92.71 mm, 140.97 mm): Horizontal Wire, length 22.86 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(97.79 mm, 138.43 mm): Wire, length 5.68 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(52.07 mm, 166.37 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(80.01 mm, 156.21 mm): Vertical Wire, length 5.08 mm
+    @(74.93 mm, 156.21 mm): Vertical Wire, length 5.08 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(120.65 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(128.27 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[label_dangling]: Label not connected to anything
+    ; error
+    @(120.65 mm, 151.13 mm): Label 'FB'
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(115.57 mm, 161.29 mm): Vertical Wire, length 2.54 mm
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(39.37 mm, 125.73 mm): Vertical Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(44.45 mm, 133.35 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 133.35 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(59.69 mm, 130.81 mm): Horizontal Wire, length 7.62 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(44.45 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(44.45 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(67.31 mm, 135.89 mm): Horizontal Wire, length 7.62 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(59.69 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(67.31 mm, 140.97 mm): Horizontal Wire, length 7.62 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 146.05 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(92.71 mm, 130.81 mm): Horizontal Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(67.31 mm, 146.05 mm): Horizontal Wire, length 15.24 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(59.69 mm, 151.13 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(97.79 mm, 130.81 mm): Horizontal Wire, length 1.27 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(97.79 mm, 138.43 mm): Wire, length 5.68 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 156.21 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(59.69 mm, 151.13 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(67.31 mm, 151.13 mm): Horizontal Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 156.21 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(92.71 mm, 140.97 mm): Horizontal Wire, length 22.86 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(106.68 mm, 130.81 mm): Horizontal Wire, length 8.89 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(97.79 mm, 138.43 mm): Wire, length 5.68 mm
+[no_connect_dangling]: Unconnected "no connection" flag
+    ; warning
+    @(92.71 mm, 146.05 mm): No Connect
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(74.93 mm, 156.21 mm): Vertical Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 166.37 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(80.01 mm, 156.21 mm): Vertical Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(52.07 mm, 166.37 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 130.81 mm): Vertical Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(120.65 mm, 133.35 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 133.35 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(120.65 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(120.65 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 151.13 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 161.29 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 161.29 mm): Vertical Wire, length 2.54 mm
+
+ ** ERC messages: 84  Errors 40  Warnings 44

test_inc-erc.rpt

@@ -0,0 +1,185 @@
+ERC report (2026-04-20T17:46:57-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(39.37 mm, 125.73 mm): Symbol #PWR31 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(44.45 mm, 133.35 mm): Symbol C4 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 133.35 mm): Symbol C5 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 130.81 mm): Symbol U1 Pin 1 [VIN, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(67.31 mm, 130.81 mm): Symbol U1 Pin 1 [VIN, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(44.45 mm, 140.97 mm): Symbol C4 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(44.45 mm, 143.51 mm): Symbol #PWR32 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 140.97 mm): Symbol C5 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 135.89 mm): Symbol U1 Pin 3 [EN, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 135.89 mm): Symbol U1 Pin 3 [EN, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 143.51 mm): Symbol #PWR33 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(59.69 mm, 143.51 mm): Symbol C6 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 140.97 mm): Symbol U1 Pin 4 [SS/TR, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 148.59 mm): Symbol R3 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 130.81 mm): Symbol U1 Pin 12 [SW, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 146.05 mm): Symbol U1 Pin 5 [COMP, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(59.69 mm, 151.13 mm): Symbol C6 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 135.89 mm): Symbol U1 Pin 11 [BST, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 156.21 mm): Symbol R3 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(59.69 mm, 153.67 mm): Symbol #PWR34 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 158.75 mm): Symbol C8 Pin 1 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 140.97 mm): Symbol U1 Pin 9 [VOUT, Power output, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 146.05 mm): Symbol U1 Pin 8 [PGOOD, Open collector, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(74.93 mm, 156.21 mm): Symbol U1 Pin 7 [AGND, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(74.93 mm, 156.21 mm): Symbol U1 Pin 7 [AGND, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 166.37 mm): Symbol C8 Pin 2 [Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(80.01 mm, 156.21 mm): Symbol U1 Pin 15 [PGND, Power input, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(80.01 mm, 156.21 mm): Symbol U1 Pin 15 [PGND, Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(52.07 mm, 168.91 mm): Symbol #PWR35 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(80.01 mm, 161.29 mm): Symbol #PWR36 Pin 1 [Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'TPS61088'
+    ; warning
+    @(80.01 mm, 140.97 mm): Symbol U1 [TPS61088]
+
+ ** ERC messages: 60  Errors 55  Warnings 5

test_inc2-erc.rpt

@@ -0,0 +1,168 @@
+ERC report (2026-04-20T17:46:59-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 130.81 mm): Symbol U1 Pin 12 [SW, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 135.89 mm): Symbol U1 Pin 11 [BST, Passive, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_driven]: Input pin not driven by any Output pins
+    ; error
+    @(67.31 mm, 151.13 mm): Symbol U1 Pin 6 [FB, Input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 140.97 mm): Symbol U1 Pin 9 [VOUT, Power output, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(92.71 mm, 146.05 mm): Symbol U1 Pin 8 [PGOOD, Open collector, Line]
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(120.65 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(115.57 mm, 151.13 mm): Vertical Wire, length 2.54 mm
+    @(115.57 mm, 151.13 mm): Horizontal Wire, length 5.08 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(128.27 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[wire_dangling]: Wires not connected to anything
+    ; error
+    @(115.57 mm, 161.29 mm): Vertical Wire, length 2.54 mm
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'TPS61088'
+    ; warning
+    @(80.01 mm, 140.97 mm): Symbol U1 [TPS61088]
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(67.31 mm, 151.13 mm): Horizontal Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(97.79 mm, 130.81 mm): Horizontal Wire, length 1.27 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(106.68 mm, 130.81 mm): Horizontal Wire, length 8.89 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(97.79 mm, 138.43 mm): Wire, length 5.68 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 130.81 mm): Vertical Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(120.65 mm, 133.35 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 133.35 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(120.65 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(120.65 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 151.13 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(128.27 mm, 140.97 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 151.13 mm): Horizontal Wire, length 5.08 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 161.29 mm): Vertical Wire, length 2.54 mm
+[unconnected_wire_endpoint]: Unconnected wire endpoint
+    ; warning
+    @(115.57 mm, 161.29 mm): Vertical Wire, length 2.54 mm
+
+ ** ERC messages: 54  Errors 33  Warnings 21

test_juncs-erc.rpt

@@ -0,0 +1,86 @@
+ERC report (2026-04-20T17:41:14-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(40.64 mm, 77.47 mm): Symbol #PWR08 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+
+ ** ERC messages: 27  Errors 23  Warnings 4

test_lbls-erc.rpt

@@ -0,0 +1,89 @@
+ERC report (2026-04-20T17:41:16-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[label_dangling]: Label not connected to anything
+    ; error
+    @(120.65 mm, 151.13 mm): Label 'FB'
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+
+ ** ERC messages: 28  Errors 24  Warnings 4

test_ncs-erc.rpt

@@ -0,0 +1,89 @@
+ERC report (2026-04-20T17:41:15-0400, Encoding UTF8)
+
+***** Sheet /
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 15 [EN, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(35.56 mm, 29.21 mm): Symbol #PWR05 Pin 1 [Power input, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 14 [VP, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 13 [VN, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 12 [D34, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 46.99 mm): Symbol ESP32-WROOM1 Pin 11 [D35, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 49.53 mm): Symbol ESP32-WROOM1 Pin 10 [D33, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 52.07 mm): Symbol ESP32-WROOM1 Pin 9 [D32, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 54.61 mm): Symbol ESP32-WROOM1 Pin 8 [D25, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 7 [D26, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 6 [D27, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 36.83 mm): Symbol ESP32-WROOM1 Pin 30 [D23, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 62.23 mm): Symbol ESP32-WROOM1 Pin 5 [D14, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 39.37 mm): Symbol ESP32-WROOM1 Pin 29 [D22, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 64.77 mm): Symbol ESP32-WROOM1 Pin 4 [D12, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 41.91 mm): Symbol ESP32-WROOM1 Pin 28 [TX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 44.45 mm): Symbol ESP32-WROOM1 Pin 27 [RX0, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(25.40 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 3 [D13, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 57.15 mm): Symbol ESP32-WROOM1 Pin 22 [D17, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 59.69 mm): Symbol ESP32-WROOM1 Pin 21 [D16, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 67.31 mm): Symbol ESP32-WROOM1 Pin 18 [D15, Bidirectional, Line]
+[pin_not_connected]: Pin not connected
+    ; error
+    @(55.88 mm, 69.85 mm): Symbol ESP32-WROOM1 Hidden pin 17 [GND, Bidirectional, Line]
+[power_pin_not_driven]: Input Power pin not driven by any Output Power pins
+    ; error
+    @(97.79 mm, 29.21 mm): Symbol #PWR06 Pin 1 [Power input, Line]
+[footprint_link_issues]: The current configuration does not include the footprint library 'Library'.
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[lib_symbol_issues]: The current configuration does not include the symbol library 'A1-KnockOffs'
+    ; warning
+    @(40.64 mm, 49.53 mm): Symbol ESP32-WROOM1 [ESP-WROOM-32]
+[missing_unit]: Symbol SW1 has unplaced units [ B ]
+    ; warning
+    @(26.67 mm, 102.87 mm): Symbol SW1 [SW_DPDT_x2]
+[lib_symbol_mismatch]: Symbol 'Conn_01x04_MountingPin' doesn't match copy in library 'Connector_Generic_MountingPin'
+    ; warning
+    @(113.03 mm, 49.53 mm): Symbol StepperConnection1 [Conn_01x04_MountingPin]
+[no_connect_dangling]: Unconnected "no connection" flag
+    ; warning
+    @(92.71 mm, 146.05 mm): No Connect
+
+ ** ERC messages: 28  Errors 23  Warnings 5